|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 58 Registered: Apr-06 | i have a 1 ohm stable amp with two channels and 2 dvc 2 ohm subs. is this how i would bridge it? http://img524.imageshack.us/img524/1232/1ohmbridged4dz.jpg |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 60 Registered: Apr-06 | anyone? |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 62 Registered: Apr-06 | bump |
|
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 2033 Registered: Feb-05 | bridging inputs should be marked on the amp. if not, refer to the manual. you'll use one + and one - from each channel, but not every amp is the same. my Zapco REF 750.2 uses the center inputs for bridging. |
|
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 2034 Registered: Feb-05 | also, when you bridge an amp, they will not be stable below either 2 or 4 ohms. most are 4 ohm stable, but there are a couple that'll work at 2 ohms bridged. |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 65 Registered: Apr-06 | whats stable mean. are u saying i need my subs wired at 2 ohms to bridge my amp? |
|
Silver Member Username: NypdlapdOntario Canada Post Number: 391 Registered: Feb-06 | ^^^CORRECT>>>>>>> you answered your own question.......LOL |
|
Bronze Member Username: Rollout4877Kent, Ohio USA Post Number: 66 Registered: Apr-06 | even if my amp is 1 ohm stable? |
|
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 2043 Registered: Feb-05 | is it one ohm stable when bridged though?? |
