|
New member Username: PdraperKnoxville, TN Post Number: 1 Registered: Jan-06 | I have an Audiobahn A8002T amp with 200 RMS x 2 at 4 ohms, 400 RMS x 2 at 2 ohms, and 800 RMS x 1 at 4 ohms. I have (2) 12" Audiobahn AW1251T subs that are dual 4 ohm voice coil. What would be the best way to wire these to get the most power out of them without screwing up my amp? Also, what type of box would be the best for these subs? Thanks alot. |
|
Silver Member Username: TjmutlowPost Number: 944 Registered: Sep-05 | wire them in a 2 ohm load parralel and the 1 sub per channel. |
|
New member Username: PdraperKnoxville, TN Post Number: 2 Registered: Jan-06 | So on the VCs of a single sub, wire pos to pos and neg to neg then run a pos and neg lead from a single VC to the amp? Then do that again for the other? |
|
Silver Member Username: TjmutlowPost Number: 949 Registered: Sep-05 | go to: the12volt.com and look for woofer wiring.... |
|
Gold Member Username: RovinTrinidad & T... Post Number: 4626 Registered: Jul-05 | http://www.the12volt.com/caraudio/woofer_configurations.asp |