Like

Handycam dcr-pc106e usb - either audio or vid (not both) ?

 

New member
Username: Jhondoe

Norwich, UK United Kingdom

Post Number: 1
Registered: Sep-10
HI,

Iv just been given my parents old vid cam (sony HC dcr-pc106e) and iv installed the drivers and software that comes with it but when i try to capture the vid stream with sonys Video capturing tool if I select the audio source as USB audio Device it messes up the vid stream (goes green and torn) but if i select my sound card as the audio input i dont get any audio from the cam stream but the vid is fine !! ?

So i can either choose to capture the video OR the audio but not both

Works on my parents comp fine.

Any suggestions out there ?

Cheers all,
JackDinn.
 

Silver Member
Username: Ieee488

Post Number: 452
Registered: Dec-07
http://support.sony-europe.com/dime/camcorders/sd/dv/dv.aspx?site=odw_en_GB&m=DCR-PC106E
 

New member
Username: Jhondoe

Norwich, UK United Kingdom

Post Number: 2
Registered: Sep-10
Found out that the problem was with one of my usb hubs, iv moved the connection to another usb port (on a different hub) and its working.

However, now i cant get the "TIME & DATE STAMP" to transfer with the stream ! iv read up on this and turns out you can't "full stop" , what a load of tosh Sony ! no wonder my parents bought another camcorder and gave this one away.
 

Silver Member
Username: Ieee488

Post Number: 453
Registered: Dec-07
one word - Firewire (aka i.Link)
 

New member
Username: Jhondoe

Norwich, UK United Kingdom

Post Number: 3
Registered: Sep-10
hmm, you say firewire but im sure that i read somewhere on this forum that even firewire does not stream the time - date stamp.
« Previous Thread | Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us