Need help with firewire connect

 

New member
Username: Yukkerz

Post Number: 2
Registered: Feb-06
I have a SC-D353 Samsung camcorder and the cam says "DV-IN" but pc doesnt see it, im using firewire cable to connect it, i just bought new card and wire and nothing.
also i have sp2 and i went to try that trick but i don't have the old sp1 installed, pc came with sp2
any help please please please.
post back on here or in email- yukker@comcast.net
or im me at simplyf0rg0tten. PLEASE HELP
 

Gold Member
Username: Project6

Post Number: 6100
Registered: Dec-03
If the cam says "DV-IN" that means signal is supposed to go in(to camera)...not out.

You should use the "DV-OUT" to connect to the PC.
 

New member
Username: Yukkerz

Post Number: 3
Registered: Feb-06
well i mean it has the dv at the bottom right when its hooked up to the pc
 

Gold Member
Username: Project6

Post Number: 6173
Registered: Dec-03
contact samsung tech support.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us