DD M1A's

 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 1
Registered: Oct-07
I have 4 of these amps. 1200Wrms @ 1ohm. Strappable. Used for 3 months. $275 each plus shipping or $1000 for all 4. Bought a Z1A so no more use for these amps.
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 2
Registered: Oct-07
Here is a link to a pic:http://i216.photobucket.com/albums/cc295/2003f150/Picture004.jpg
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 599
Registered: Jun-07
you got pm
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 3
Registered: Oct-07
This may sound dumb but where is the link to check my pm's?? I am over @ the dd forum alot. Also I am at wisechoiceaudio.com. If people are wondering why I only have a few posts on here that is why. I am trying to sell the amps as quick as possible.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 602
Registered: Jun-07
email me at j_c_wheeler8@hotmail.com
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 603
Registered: Jun-07
do you have msn messenger? If so add me its j_c_wheeler8@hotmail.com If not, we can work over this. I am about to pick up a 3512 like i said and i'd like this amp to push it. You seem to be pretty knowledgable. What kind of box you think I should put it in to get the most out of it. I am looking for SPL and what kind of numbers you think I could hit in the closed trunk of an Acura?

I keep getting a message saying message has failed to be delivered... Hmm...
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 4
Registered: Oct-07
Did you get my email?? My number is 1-228-424-7458
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 604
Registered: Jun-07
yea i did, but i couldnt send one back apparently. I have a saz-1500d right now, and I gotta sell this before I can buy yours, unless you're interested in a trade + cash? Whats the condition on these amps, did you buy them new, how long have you owned them? How do they look cosmetically, and how do they peform mechanically? Thanks.
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 5
Registered: Oct-07
I don't have messenger and one of these amp probably isn't going to do more than that sundown 1500. What ohm sub are you getting?? Its hard to say for spl what will work in that car. I have mostly messed with trucks. I can say for daily they seem to like 3-3.5 cubes tuned to 38-40 hz.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 605
Registered: Jun-07
3-3.5 for a 12? Well I would love to get ahold of a M1A to match it up with my 3512. You suppose it will be noticably less?
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 6
Registered: Oct-07
Perform flawlessly. Bought them brand new. Each has a few scratches. I could not get them to run below one ohm though.Very good protection.No trades lol I already have 2 MM4000.1 autoteks
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 7
Registered: Oct-07
Na it should sound around the same as the sundown but a pair of these amps would really make the 3512 shine.I had one amp per 95 and it was loud but a pair on each sub was ungodly.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 606
Registered: Jun-07
niice. Thats cool, I got it up forsale now. I am dealing with stock batt/alt, so I couldnt go with more than 1 ;) Do you have bench tests on any of the amps? The 3512 RMS is 1200rms I believe anyways, so I think 1 would be ok for a daily driver. You said 3-3.5 cubes @ 40Hz. Isnt that a bit big for a 12? I was gonna Kerf it and build an amp rack in it as well, but I had 2.0 cubes @ 32Hz for my 12" SI mag and it slammed! But this is a different sub, I just want to know what I can get the best out of it, since I'll be custom building the box myself.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 607
Registered: Jun-07
do you also have any dimensions of the amp?
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 8
Registered: Oct-07
Na on dd's subs bigger is better LOL. I mean they will work in 2.5 but 3-3.5 will have more low bass. Also make sure you do enough port area.
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 9
Registered: Oct-07
http://www.ddaudio.com/dd/amp/amp.asp?series=M
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 608
Registered: Jun-07
Bret. I am ready to purchase your amp, whats your paypal addy?
 

New member
Username: 2003f150

Biloxi, Mississippi

Post Number: 10
Registered: Oct-07
lilb7777@aol.com
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 11
Registered: Oct-07
Will ship Wed. If the money is in the paypal by then.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 609
Registered: Jun-07
I can paypal you tonight, would it be possible to have it shipped by tomorrow?
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 610
Registered: Jun-07
Hey, I sold the amp and now I got $278 in my paypal after fees were deducted, I didnt realize it was $275+shipping, is $278 shipped cool?
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 12
Registered: Oct-07
I have to go get it from the stereo shop...I can try and get it tonight. I put them all 4 up there to see if they would sell up there. You can wait and paypal it tommorrow if you would like.
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 13
Registered: Oct-07
Yeah that will work.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 611
Registered: Jun-07
I can paypal whenever, but $278 leaves me with about $.30 left in my bank account. I can't shuck out any more money, because I dont have it, and I have a court date on wednesday with a couple hundred bucks of fees that I dont have lol, I prolly should be buying this now, but its such a sweet amp! If you can get it shipped out by tomorrow, let me know and I'll paypal you right now.
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 14
Registered: Oct-07
Ok I will let you know.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 612
Registered: Jun-07
https://www.ecoustics.com/electronics/forum/car-audio/396671.html
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 613
Registered: Jun-07
I gotta friend whose interested in 2 more of those M1a's, I pointed him in this direction, hope it works out.
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 15
Registered: Oct-07
Cool I appreciate it. It is like a Damn Monsoon outside. I dunno where all this rain came from.
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 614
Registered: Jun-07
hey, did you need something? I am in the middle of an AutoCAD Lecture lol
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 16
Registered: Oct-07
I will hook it up tonight just to make sure everything is working fine still. I will let you know tonight but will probably be around 7 or 8 O'clock.What you going to school for?
 

Silver Member
Username: Cried

Erie, PA US

Post Number: 615
Registered: Jun-07
sounds good. Engineering with an MBA isss the goal, but we shall see lol.
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 31
Registered: Oct-07
Ok people. I still have 3 of these left.
 

Bronze Member
Username: 2003f150

Biloxi, Mississippi

Post Number: 32
Registered: Oct-07
SOLD!!!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us