I think that is way overkill. The KX600.1 would be plenty. Wire them down to 2ohms (which you can do with these subs). I wouldn't go with the KX1200.1 unless you used the Type X sub
Excellent, Ok so what would you get? if i were to get the Kicker would a sealed box do the job?.. And same goes for the memphis a sealed box would do it but obviously with 100watts less it wouldnt pound as much??
Ok i got my memphis amp hooked it up and WOW what an amp!.. im impressed but my question is the manuel suggests a 8gauge wire should i get a 4 gauge or do what the manual suggests?
The kicker 1200 will really put out about 1300-1500 watts easy, they underrate their amps.
How long is the wire from the battery to the amp? You will only need an 8g unless it is unusually long, but if you plan to hook up another amp for components I would go ahead and get a 4g to save time and money.
Visitor78
Unregistered guest
Posted on
Stugots, I would still use 4 gauge, it's not going to hurt anything...