|
tyuann Unregistered guest | i have three 15" audiobahn aw157t and need 2 know wat is the best ohm load i can get and need 2 know will they hit hard b4 i install them |
|
tyuann Unregistered guest | 0o yeh would dyno-mat help them sound like they are hittin harder |
|
Bronze Member Username: InvainMichigan United States Post Number: 61 Registered: Aug-04 | if the audiobahn's are in the right enclosure they shoudl hit hard. They will sound crappy, but they will be loud. |
|
Silver Member Username: InsearchofbassPost Number: 244 Registered: Jun-04 | what ohm bridged can you amp go down to (mono) and what kind is it? |
|
tyuann Unregistered guest | the dyno-mat-wouldnt help joe? |
|
tyuann Unregistered guest | 3000W 2 Channel High Current Amplifier UL600HC 2 x 300W RMS @ 4 Ohm Stereo 2 x 500W RMS @ 2 Ohm Stereo 2 x 1000W RMS @ 1 Ohm Stereo 2 x 1200W RMS @ 0.5 Ohm Stereo 1 x 3000W MAX @ 1 Ohm Bridged Dimensions (W x H x L): 12.5"x 2.6"x 26.88" |
|
Silver Member Username: InsearchofbassPost Number: 264 Registered: Jun-04 | im assuming they are dual 2 ohm woofers cuz i cant find the model you listed but the 1508 t is dual 2 ohms so i figure your 1507t's are last years model so they should be 2000 rms each Wiring Option #1 Wiring Option #2 Speaker Polarity Positive (+) Negative (-) red post black post purple dot - 4 ohm no dot red dot - 8 ohm no dot 1.33 ohms mono |
|
Silver Member Username: InsearchofbassPost Number: 265 Registered: Jun-04 | 1.34 ohms sorry bout that heres the link since it wont show up http://www.rockfordfosgate.com/rftech/wiringwizard.asp |
|
tyuann Unregistered guest | mi bad sean this is the type of sub and it has like 8 different things 2 put the wires into which one i just wanna test it first thanx 4 da info AW1571T 15" NATURAL SOUND WOOFER 60 oz. Strontium Magnet Power Handling: 500 watts RMS Frequency Response: 21Hz - 1kHz Efficiency: 93.4 dB PHAT Foam Surround Non-Pressed, Non-Transfer Paper Cone KM3' Coated for Virtually No Cone Distortion 2" 4-Layer ASV Voice Coil Dual 4 Ohm 2 or 8 Ohm Operation Mounting Dimensions: Depth; 6 7/8" Hole; 137/8" Diameter; 15 3/8" MULT-CONNECT Lug Lock Terminals |
|
Silver Member Username: InsearchofbassPost Number: 266 Registered: Jun-04 | if you wire them the way the rockford says youll come up with 2.67 ohms bridged this is your best bet for power and functions should be like 1200 watts total to all three just go to the link and click 3 subs dual 4 ohms and it will show you how |
|
Silver Member Username: InsearchofbassPost Number: 267 Registered: Jun-04 | they are only dual voice coils by the way thought you should know |
|
tyuann Unregistered guest | 1200 peak or rms will it b louder if had 2 hollywood excursion 12" with 500 watt rms each |
|
tyuann Unregistered guest | but i no that but in the diagram it shows 4 wires going 2 each sub b4 it was onli 2 how would i wire those if onli 2 are coming 4rm mi amp |
|
Silver Member Username: InsearchofbassPost Number: 273 Registered: Jun-04 | no the two hollywoods wont be louder the three 12's will be louder less you mean add the 15s with the 12's then that would be a different story as far as the wiring go to a car stereo shop and ask them to help you understand or pay them to wire it up ....also peak or rms what you listed numbers wise is what matters in comparison |
|
Bronze Member Username: InvainMichigan United States Post Number: 71 Registered: Aug-04 | Actually I don't know, my cousin had just 1 hollywood and it was VERy loud for just 1 15. But how know's now, I thought hollywood quit making subs? |
|
tyuann Unregistered guest | the hollywood subz i had b4 but i blew because i didnt no nothin about subz n i had the audiobahn 4800 watt amp onli powerin it(it thought size mattered) but now i no different and the hollywood excursions are used |