|
tony_h Unregistered guest | im wondering what wattage i should use for a brahma. 1500? 1000? 500? thanks |
|
tony_h Unregistered guest | guys i need some help here got my brahma right here need an amp b-4 school starts on 31. |
|
Gold Member Username: Jonathan_fGA USA Post Number: 1261 Registered: May-04 | http://www.acoustic-visions.com/~acoustic/products/subwoofer_drivers/adire_brahm a/ On the bottom you'll see a power chart of what's required for certain sealed boxes. If you build ported, I'd recommend about 800 watts and to not push the sub hard below tuning, use a subsonic filter. |
|
Bronze Member Username: DavenPost Number: 74 Registered: Jun-04 | i use a jbl 1200.1 and i would say thats about what you should be feeding it. its rms rating is thermal, it gets full excursion well before that. |
|
Bronze Member Username: DavenPost Number: 75 Registered: Jun-04 | Oh, and this is in a ported box (32hz tune) had it running for about a year without any probs. |
|
tony_h Unregistered guest | what about a hifonics nemesis nx750d. puts out 750 watts @ 1ohm. kinda on a budget don't want to spend over 275 dollars. can get the nemesis for about 180 shipped. |