|
Anonymous | can any help.I have an Autopage RS-850 with a DEI 455J door lock module and a DEI 556U by-pass module.Having problems with the door trigger and door locks,it locks and unlocks,but only unlocks the driver door.And I have a car starter,it works,but the BRAKE,ABS,AIR BAG light stays on.here is what I hooked up this is from the Autopage.STARTER OUTPUT=YELLOW//+12V=RED&PINK/BLACK //IGNITION OUTPUT=DK.BLUE//ACC.OUTPUT=RED&BLACK//. Do I need a IGNITION 2 OUTPUT and a SECOND ACC.OUTPUT. I did not jook these up, but it still starts,but the BRAKE,ABS,AIR BAG light stays on.need help |
|
New member Username: Ps1k0RI Post Number: 4 Registered: Aug-04 | sounds like you are missing an accessory or an ignition wire for the lights. accorging to www.bulldogsecurity.com you are going to need 2 relays in each door for the locks to work right |
|
Anonymous | http://www.bulldogsecurity.com/wireing%20diagrams2.htm If you post the site this way they don't have to search and the new way you will have to register after Sept. 1st... |
|
New member Username: Ps1k0Post Number: 9 Registered: Aug-04 | yes, but you see i was preparing them for the sept 1st change ;) actually, i've never seen that page b4. |