Mercedes 2001 clk200 teyp Code Alp audio 10 cd

 

New member
Username: Recepkzn

Post Number: 4
Registered: Feb-21
Seri no Al2199w1262055 model no=MF2199
 

Gold Member
Username: Iwos

Wales

Post Number: 5300
Registered: Jul-14
BONJOUR, HELLO, BUENOS DIAS.

c.r.t.m.auto@gmail.com

https://www.radio-code.co.uk/purchase.php
 

New member
Username: Recepkzn

Post Number: 5
Registered: Feb-21
Ucretli olmayan bir site yokmu ?
 

Gold Member
Username: Iwos

Wales

Post Number: 5301
Registered: Jul-14
On this forum we do not understand Turkish
 

New member
Username: Gmerimakis

Κηφισιά

Post Number: 3
Registered: Feb-21
Hello,
Please help for MBenz Becker Audio 10:

Model: BE6021
Serial: 11191677

Many thanks!
 

Gold Member
Username: Iwos

Wales

Post Number: 5302
Registered: Jul-14
You have the answer here => https://www.ecoustics.com/electronics/forum/car-audio/736189.html#POST2068027
 

New member
Username: Gmerimakis

Κηφισιά

Post Number: 4
Registered: Feb-21
CRTM-1

Many, many thanks!
Where do I donate, please?

Regards to all for the support!
 

Gold Member
Username: Iwos

Wales

Post Number: 5304
Registered: Jul-14
Mercedes Audio 10
Becker BE 6021

As originally fitted to the:

Mercedes Benz
Sprinter

If you are trying to fit this radio to a different vehicle, then you may find yourself with the Error message of "PROD". This stereo is electronically paired, or "Married" to the engine management system of the vehicle it came out of using very sophisticated CAN-BUS system technology.

When it is first powered up, it will communicate with the vehicle, and whilst this process is in operation the set will appear to function correctly, and if communication has been successfull, it will continue to operate in the normal way.

However, if removed and refitted into a different vehicle other than the original one, it will not recognise the encrypted CANBUS identification of the new car, and will instead display an error message of "PROD" after around 30 seconds.

This Radio cannot therefore be transferred from one car to another, unless it has first been reset back into its original "Delivery Mode" with the internal CAN-BUS data memory reprogrammed for use with the new vehicle.

Code Entry as Follows:

This device does not require a digit code
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us