Need help with Single reflex bandpass enclosure


New member
Username: Sparky2131

Princeton, TX United States

Post Number: 1
Registered: Feb-16
I'm new to box building as this is only my fifth box to make. I want to make sure I'm not going to totally ruin my sub. It's nothing fancy just an Audiomobile elite 2208. Manufacturer says it's designed for a bandpass so might as well build my first with it. Manufacturer suggest largest sealed box as .65 ft^3. So I went with that for the sealed section (net) and 1.4 ft^3 for the ported section. 1.5"* 12.5" port @ 12.75" length for a tuning of 47hz. Let me know if I'm way off, as I'm sure being a noob I am and could use some input from the pros.
Thanks in advance

T/S parameters
RMS- 400 w
Fs- 38 hz
Vas- 10.9 L
Qes- .58
Qms- 3.2
Qts- .491
Sd- 206cm^2

Gold Member
Username: Joe1234

Post Number: 2049
Registered: May-09
You need to model it to be sure but it seems ok for a low end woofer
« Previous Thread | Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message


Shop Related Deals


Main Forums

Today's Posts

Forum Help

Follow Us