Amplifier not getting power BOSS 2014 Chaos 2 Channel 1600 w


New member
Username: Mason

Post Number: 1
Registered: Jun-15
Ok so noticed my amplifier was not getting any power? Checked my ground even ran a direct line from battery to my ground to be sure, checked all my connections, than
Proceeded to run a wire from my 12v to my REM. My amplifier powered on so I changed my Fuse under my hood labeled RADIO changed the Fuse on my head Unit checked my
connection on my BLUE+WHITR REM wire on my head unit and even ran a New REM wire.
Still nothing!!! No power unless I have that connection from my (REM to my 12v) I'm almost at the point I'm going to run my
REM straight from my battery but I don't want to go that route for obvious reasons. I'm self teaching my self electrical so could use some imput on what my best course of action would be? Willing to try
anything at this point
« Previous Thread | Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message


Shop Related Deals


Main Forums

Today's Posts

Forum Help

Follow Us