Hi friends, here is my radio stamp some friends told me code is "3325" but when i typed i pushed to 5 up to 10 seconds it didn't work again... i tryed again and pushed to 6 and it didn't work too... could you help me ?
www.radyocankaya.com/r.jpg is my radio serial numbers...
Make sure you are using the correct Code entry Instructions (see below) If it does not work then your radio may have been recoded in the past to a completely different number
PHILIPS RENAULT CODE ENTRY INSTRUCTIONS
FOR CARS WITH A STEERING WHEEL REMOTE CONTROL
(Note :If you don't have the [¬ ] button then push the thumbwheel in and some will have an [ A¬ ] button )
Turn on the radio and the display will show 'CODE' then 0000
Use the Steering Wheel Remote Controls for code entry.
Press the [¬] button then rotate the thumb wheel for the correct first digit Press the [¬] button then rotate the thumb wheel for the correct second digit Press the [¬] button then rotate the thumb wheel for the correct third digit Press the [¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen, press and hold the [¬] button for up to 10 seconds to store the code
IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO
Press the First Preset Button repeatedly for the 1st digit to be displayed Press the Second Preset Button repeatedly for the 2nd digit to be displayed Press the Third Preset Button repeatedly for 3rd digit to be displayed Press the Fourth Preset Button repeatedly for 4th digit to be displayed
Then press and HOLD Preset button 6 for 10 seconds to store your code
(Note :Some radios use Preset Button 5 to store the code ) ============================================================