Amp for 3-10 RE SRX10D4 (O.S. Autotek SX1700, MMATS D100HC/D200HC, ?????)

 

New member
Username: Backroll2blind

Post Number: 1
Registered: Oct-11
Guys I am looking for something in the 2K max power range at either 2.67, or .67 ohm range. I've been out of car audio for a long time (obviously by my choices, but I trust old school amps at lower than rated impedance levels) and need some advice as to which way to head as far as amplification at either .67 ohms, or 2.67 ohms (1500-2000x1). I found these amps on ebay for a fair price (300 for the MMATS is the highest) so nothing obscenely expensive. If the old autoek will handle the .67 ohm load, let me know as I would prob. go that route, but if you all think a D200HC will handle it, I am open to suggestions, or even if a D100HC will still make enough power to run the trio.
 

Silver Member
Username: Joe1234

Post Number: 631
Registered: May-09
for 0,67 ohm load the MMATS 2000.05 is a solid choice, any .5 ohm stable amp can do, a 2.67 load is not a good idea for 2K power.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us