AQ 1200d

 

Bronze Member
Username: Hunter77

West milford, Nj United states

Post Number: 38
Registered: Sep-08
Hey guys i have an AQ 1200d i just ordered an RL-p 15 dual 2 ohm.

i want to run this sub a 1 ohm.
It will be in a 4.0 cubic foot box tunned to 30hz

my AQ 1200d is rated at 1400 watts at 1 ohm do you think the sub will be ok? or should i set the gains really low?

is this the right equation.

Sqrt(ohms*watts)
Sqrt(1*1000watts) = 31.6v should i set that with my ohm meter?

someone help i wanna get this system bumpin!
 

Silver Member
Username: Kaerfpl

Spencerport, NY USA

Post Number: 970
Registered: Jun-06
I was able to find a few other people who have this subwoofer that were running roughly 1000 watts and it was performing just fine.

Just be sure that when you wire everything up, to start by turning down all the settings on the aq1200d to prevent anything from breaking, and adjust accordingly.
 

Gold Member
Username: Jbpitt

Pittsburgh, Pa. Usa

Post Number: 1203
Registered: Jul-09
x2

and yes that is the right equation....
 

Bronze Member
Username: Hunter77

West milford, Nj United states

Post Number: 39
Registered: Sep-08
thanks guys i appreciate it
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us