|
Bronze Member Username: Jonez788Post Number: 50 Registered: Jun-04 | How will I wire the coils in parallel on my 4 ohm DVC subs? |
|
Silver Member Username: JayjLouisiana USA Post Number: 293 Registered: May-04 | How many subs do you got?? And what kind of amp will you be using?? |
|
Bronze Member Username: Jonez788Post Number: 51 Registered: Jun-04 | 2 Subs. Kicker KX 800.2 Running at 2 ohms 2 X 400 watts. |
|
Silver Member Username: JayjLouisiana USA Post Number: 295 Registered: May-04 | You will want to do it like Glass told ya in the amp section. Wire each sub by its self and hook one sub to each channel so you will have a 2 ohm load on each channel. Heres a diagram to help ya. Be sure to do each sub the same way. http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs=1&impedance=DVC4x2 |
|
Silver Member Username: GrmncrsnbrVA Post Number: 147 Registered: Jun-04 | you can also wire the coils in parellel and then the subs in parellel and run them to a mono 1 ohm amp |
|
Bronze Member Username: Jonez788Post Number: 53 Registered: Jun-04 | So I will do it like this option? 1 sub / Dual Voice Coil - 4 ohms x 2 to each sub on that link you gave me? Both of them that way and then pos to pos and neg to neg on each separate channel.....the regular way you would anyways? |
|
Silver Member Username: GrmncrsnbrVA Post Number: 151 Registered: Jun-04 | yes |