Radio code for Clio Dynamique 2001

 

New member
Username: Shazzif

Post Number: 1
Registered: Apr-10
Hi,
I need the code to reset my radio after battery died. I didnt get any books with the car - how do I find the radio serial number etc and hopefully get the code? Reg SM51 U0F
 

Silver Member
Username: Hay88

Post Number: 367
Registered: Mar-10
hi shazzif post the numbers/letters from below the main barcode
something like 7700xxxxxxtt123 or the security code like Q123
can be found in a small box then i can help you
OFF of the radio
 

New member
Username: Shazzif

Post Number: 2
Registered: Apr-10
its built into my car and cant see any serial number or anything ?
 

New member
Username: Shazzif

Post Number: 3
Registered: Apr-10
The serial number I received from Renault is 1-183142458

Can you help?
 

Silver Member
Username: Hay88

Post Number: 430
Registered: Mar-10
hi sharon the only way we can give you you code is by remove to get info.
they are too small holes each side of the radio put a very small screwdriver or long nails into the hold and push it outwards sideways and pull the radio forward carefully. then once out write.down.the numbers/letters from below the main barcode
something like 7700xxxxxxtt123 or the security code like Q123
can be found in a small box then i can help you
 

New member
Username: Shazzif

Post Number: 4
Registered: Apr-10
HI there

Got the infromation, finally:

Model 22DC278/62B

Prod No: FD0201470091930

TOR995
RN278F10091930

Bar Code: 8200057681TR995

Hope this helps!

Thanks in advance, Sharon
 

Silver Member
Username: Hay88

Post Number: 555
Registered: Mar-10
Shazzif
your code is 8081 how to enter below.
IF YOU DONT HAVE KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ] button then rotate the thumb wheel for the correct first digit
Press the [ ] button then rotate the thumb wheel for the correct second digit
Press the [ ] button then rotate the thumb wheel for the correct third digit
Press the [ ] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ] button for up to 10 seconds to store the code

FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press buttons 6 OR 5 to store. for 10 seconds

note the radio does not lockout after a wrong code entry it only doubles the time to wait before
the next retry...if a wrong code is entered it will display error then after the delay should display "0000")
 

New member
Username: Tositapili

Post Number: 2
Registered: Apr-10
thank you ever so much hay88 my radio is work now...thank you
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us