Voice coil configuration jumpers?

jon New member Username: Jonnrall1993 Post Number: 5 Registered: Mar-10	Posted on Sunday, March 21, 2010 - 05:32 GMT how should i hook em up to my alpine type x if im going to wire it at 2 ohms? do i have to use them? thanks
GlassWolf Platinum Member Username: Glasswolf Columbia, SC USA Post Number: 12597 Registered: Dec-03	Posted on Sunday, March 21, 2010 - 18:09 GMT bridge pos1 to pos2 bridge neg1 to neg2 wire amp to one pair of pos/neg as normal http://www.rockfordfosgate.com/rftech/woofer_wizard.asp
steve Bronze Member Username: Sleste8 Shelbyville, MI United States Post Number: 45 Registered: Mar-10	Posted on Sunday, March 21, 2010 - 20:05 GMT hay glasswolf, i know ive ben asking you a lot of questions but bare with me... so my ² L7's are 4 ohm DVC's should i use my PRS for now to power them untill i get a recone for my solo x? woofer wizard says i can either do them in a 1 ohm load, or a 4 ohm load. and at 4 ohm's my PRS would be puting out only 750 watts RMSx1 would this be sufficient???? please help, seems how that legacy is fried. and the PRS is the only other amp i have at the moment.
GlassWolf Platinum Member Username: Glasswolf Columbia, SC USA Post Number: 12607 Registered: Dec-03	Posted on Sunday, March 21, 2010 - 22:32 GMT sure you can use it. give it a try. if it's not enough to drive them both, just drive one of the subs for now. at last it'll be something. mind you half the power to two subs vs twice the power to one sub, should sound the same.. +3dB for a second sub, vs +3dB for 2X the power.. but that's an "average" figure. one sub may work out better.
GlassWolf Platinum Member Username: Glasswolf Columbia, SC USA Post Number: 12608 Registered: Dec-03	Posted on Sunday, March 21, 2010 - 22:34 GMT I haven't actually had anyone sit in my car and ask me "Doesn't it go any louder?" I have had a few ask me to turn it down, though.
steve Bronze Member Username: Sleste8 Shelbyville, MI United States Post Number: 50 Registered: Mar-10	Posted on Monday, March 22, 2010 - 16:57 GMT ok thanks, ill give it a try today. and yeah, my ex girlfriend use to hate my solo x. "turn it down, turn it down" all the way home. lol one time i drove through a trailer park and some lady came running outside and said, "u almost gave me an **gasm" LOL
GlassWolf Platinum Member Username: Glasswolf Columbia, SC USA Post Number: 12627 Registered: Dec-03	Posted on Monday, March 22, 2010 - 20:24 GMT classy!
Trollin'Motor Bronze Member Username: Tmotor Post Number: 12 Registered: Oct-09	Posted on Monday, March 22, 2010 - 20:46 GMT quote: one time i drove through a trailer park and some lady came running outside and said, "u almost gave me an **gasm" Most of the ladies that live in my trailer park tell me the same thing, except I don't have any bass mmmhmm, there's just something about a tootheless/frizzied hair broad that drives me crazy.
jon New member Username: Jonnrall1993 Post Number: 8 Registered: Mar-10	Posted on Monday, March 22, 2010 - 21:25 GMT ok so should i bridge it with speaker wire or the configuration jumpers or both?
GlassWolf Platinum Member Username: Glasswolf Columbia, SC USA Post Number: 12629 Registered: Dec-03	Posted on Monday, March 22, 2010 - 23:03 GMT if it's got bridges, use them. most subs don't, so we end up using short (6" or so) speaker wire bridges.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us