|
Bronze Member Username: Jonez788Post Number: 40 Registered: Jun-04 | How will I wire 2 4 ohm DVC subs into a 2 ohm load? |
|
Silver Member Username: GrmncrsnbrVA Post Number: 135 Registered: Jun-04 | you wont thats how with that setup you can get 1Ohm or 4Ohm if im not mistaken |
|
Silver Member Username: Davids2004Houston, TX USA Post Number: 236 Registered: Jun-04 | http://jlaudio.com/tutorials/wiring/index.html |
|
Bronze Member Username: Jonez788Post Number: 42 Registered: Jun-04 | Davids....what exactly should I look at? I remember glass telling me that I can wire them in parallel somehow to get 2 ohms. |
|
Silver Member Username: Davids2004Houston, TX USA Post Number: 241 Registered: Jun-04 | You can only wire 2 dvc 4 ohm subs at 4 or 1 ohm. Look at the one that says 2 dvc and it will show you how to do it. |
|
Bronze Member Username: Jonez788Post Number: 45 Registered: Jun-04 | okay then, I just changed my order to 2 2 ohm DVC subs. With those I'll be able to get a 2 ohm load right? |
|
Silver Member Username: Jonathan_fGA USA Post Number: 694 Registered: May-04 | Yes. You wire the coils in series, then both subs in parallel to the amp. |
|
Bronze Member Username: Jonez788Post Number: 48 Registered: Jun-04 | Okay, thanks guys. I just HAD to be certain, as it's 170 bucks for these and I wanted the right ones. |