Need some advice on setting up system

 

New member
Username: Hi_life

Post Number: 1
Registered: Sep-09
I am looking at installing 2 12's in my ex cab toyota truck. As of right now I am thinking about going with 2 12'' Alpine Type R's 2 ohm DVC and one Alpine MRP-M1000 amp. Are there any better combos out there for around the same price?

I also already have a Kenwood 140 watt 4 ch. amp running 4 comp speakers. If I run 2 gauge wire from the battery to a Capacitor then to a block would it be better to run 2 or 4 gauge wire to the 1000 watt Alpine amp? And just 8 gauge to the Kenwood amp.

Also what ported box would you recommend for this set up?

And my last question is what size and brand Capacitor would you use for this set up?

Sorry for all the questions I just wanna make sure I do it right the first time.

-Alex
 

Silver Member
Username: Kingandsons07

TEAM NEBRASKA Lincoln,NE

Post Number: 818
Registered: Aug-08
wow this is kinda messy all ready, have you got the subs and amp yet? and there good if you can get them at a good cost!

how much you all want to spend on everything?

what do you have all ready and what do you want to get?

look in to two 12" RE SEs on a RD1000.1

you can pick up a pair prb cheaper the the type Rs, and they will sound better/louder but that still depend on if you can make or get a good box made
 

New member
Username: Hi_life

Post Number: 2
Registered: Sep-09
Yea sorry for the mix up.

Right now all I have in the truck is the 140 watt 4 ch Kenwood amp and all new door speakers.

I want to add 2 12's and I am thinking about going with the Alpine Type R's 2 ohms DVC and the Alpine M1000 amp. I found the subs online for $140 each and the amp for $320.

So I just wanted to know if there was any other subs or amps out there that are better for around the same price?

I hope that help clear it up a little.

-Alex
 

Silver Member
Username: Ericmb

Waycross, Georgia United States

Post Number: 165
Registered: Nov-08
2 audioque sdc2.5 12s 4ohm... 4-4.5 cubes 33 hz.. on an audioque 1200D.. you might pay a little more, you might pay around the same. depends on where you get the alpine products.. but you will be happier with the audioque products. guaranteed!!
 

Silver Member
Username: Kingandsons07

TEAM NEBRASKA Lincoln,NE

Post Number: 820
Registered: Aug-08
"Alpine M1000 amp. 320"

look in to the new RD amps there
1000.1 is like for $250 i think there
1750.1 is $350 and thats all new
 

Gold Member
Username: Hittin1

TEAM REVOLUTION, La. Lake Charles...

Post Number: 3899
Registered: May-07
it would be less for the AQ setup.... I have two of the AQ sd2.5 12's i'll let go for 150 (for both) plus actual shipping. p/u a new RD 1000.1 for 209-250 and enjoy. I


but just a fyi
Ebay has the m1000 for 249 shipped.
http://cgi.ebay.com/BRAND-NEW-2009-ALPINE-MRP-M1000-MONO-BLOCK-AMPLIFIER_W0QQite mZ250454953244QQcmdZViewItemQQptZCar_Amplifiers?hash=item3a50474d1c&_trksid=p499 9.c0.m14


and the Type-r's for $254 for both shipped.
http://cgi.ebay.com/2-ALPINE-SWR-1222D-CAR-AUDIO-12-TYPE-R-SUBWOOFERS-122_W0QQit emZ360186500576QQcmdZViewItemQQptZCar_Subwoofers_Enclosures?hash=item53dcc9d5e0& _trksid=p4999.c0.m14
 

Silver Member
Username: Boomtank

Rochester, NY USA

Post Number: 629
Registered: Oct-06
Whats ur max dim's for your enclosure? I can design/build you a box.

i would go with the Rd1000.1 or AQ1200D over the alpine amp.

As for the subs the SD2.5, RE SE and Alpine Type R's are all good subs. Find which you can get for the lowest price.
 

Silver Member
Username: Boomtank

Rochester, NY USA

Post Number: 630
Registered: Oct-06
Also the eD nine.1's are still on sale for $195. Thats 1400 watts rms at 1ohm for under 200 bucks. pretty good deal.
 

Platinum Member
Username: Nd4spd18

Philadelphia, PA

Post Number: 10682
Registered: Jul-06
If you ever get it that is..... its ed haha
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us