New member Username: XwilleyumxPost Number: 2 Registered: Jul-09 | Hey, I'm planning on my first system. I've done some researching and I've have planned the following. For my sub I'm planning to get either Image dynamics 12d4.v3 or Elemental designs 13Av.2. I will be getting Ed nine.1 to run either subs. For my speakers I currently have eclipse components forgot which model but run at 75 rms 150 peak. For the amp I'm still deciding on what to get to power the components. Also for the H.U. I'm planning to get eclipse new multi-media avn726e. So my questions are if I was to build my own box for the subs how big should it be? Tuned ? ported or sealed? For the amp kit should I use a 0 gauge? What brand kit? Which sub would be better for price? Which amp should I get to power my components? My price range for my whole system is around 2k. Thanks in advance for Reponses -william |
Gold Member Username: Hittin1TEAM REVOLUTION, La. Lake Charles... Post Number: 3822 Registered: May-07 | Those two subs are totally different. To run the ID with that amp, you would need to run it @ a 4 ohm load. whereas you could give the ED sub the full ~1200 wrms. The enclosure recommendation would depend on which sub you choose. I love my alpine mrp-f550 for my comp sets. It does more than enough. My advice: Get a different amp unless you are buying a used one or already own it. It is NOT worth the wait. good luck |
New member Username: XwilleyumxPost Number: 3 Registered: Jul-09 | As for now I'm leaning more to the IDmax. If I was to get it which amp would you recommend? I'm looking for one in the price range of 200$. As for my power/ground wire would 0 gauge be recommended? |
New member Username: XwilleyumxPost Number: 4 Registered: Jul-09 | any help please? |
Platinum Member Username: InsearchofbassYork, Pennsylvania Post Number: 12146 Registered: Jun-04 | You could get an rd 1000.1. |
Gold Member Username: Hittin1TEAM REVOLUTION, La. Lake Charles... Post Number: 3823 Registered: May-07 | get the ID and the RD1000.1 and run it @ a 2 ohm load . I would use 0 Ga. as well. |
New member Username: XwilleyumxPost Number: 5 Registered: Jul-09 | i cant find any online rd dealers. i'm from SO Cali in LA county. which brand would you recommend for an amp kit? |
Platinum Member Username: InsearchofbassYork, Pennsylvania Post Number: 12158 Registered: Jun-04 | You would contact steve miller for rd equipment. I dont know his number right now though. |
Gold Member Username: Hittin1TEAM REVOLUTION, La. Lake Charles... Post Number: 3826 Registered: May-07 | 770-975-9100 call Steve . Kru, Kicker, RF, a few good amp kit makers |
Gold Member Username: Hittin1TEAM REVOLUTION, La. Lake Charles... Post Number: 3827 Registered: May-07 | I just noticed that you changed from the ID12d4 V.3 to the IDMAX.... I like the sounds of that much better and get the Dual 2 ohm v.c. to run the RD at 1 ohm. |
New member Username: XwilleyumxPost Number: 6 Registered: Jul-09 | I just got my 12 IDmax d2ohm =]. im looking into building my own box for it. im looking for a ported box but dont know how big i need to cut it. for trunk space i have about 18 inches in height and 30 inches in width. -william |
Platinum Member Username: Rovin1 15 = 152.5 DBs ...Trinidad & T... Post Number: 15478 Registered: Jul-05 | gr8 sub choice with the idmax look at the tech section of their site which has some box plans .... |
Silver Member Username: TreezIts not loud til it he... Post Number: 428 Registered: Aug-06 | Welcome to Ecoustics !!! hope this helps... http://www.imagedynamicsusa.com/pdf/iD%20Sub%20woofer%20box%20designs/ I'd try 2.5 tuned to 30 hz. Let us know how it works out... |
Platinum Member Username: InsearchofbassYork, Pennsylvania Post Number: 12212 Registered: Jun-04 | Excellent choice of sub. |
Silver Member Username: Billybobjoesmithjr_th_3edSouth, TX US Post Number: 156 Registered: Sep-09 | you need to get 4 Kicker comp 15's and two Sony explode 2000'ds my boy has been running that setup in his trail blazer and has shattered 3 windshields and is the loudest in Texas |