I am probably going to get two MTX 12" 8000s that run at 4 ohm and I have been wondering what amp would run them the best.
Thanks for the help.
Micheal
Posted on
Can anyone help me?
I really do not know..
bdm
Posted on
what are the specs of the subs and what do you have for power as of alt
Micheal
Posted on
Impedance 4 ohms Cone Material Mica-filled poly Surround Material Nitrile Butadiene Rubber Sealed Box Volume (cu ft) 1 - 2 Ported Box Volume (cu ft) 2 - 3 Port diameter (inches) 4 Port length (inches) 18 Free-Air No Dual Voice Coil No Sensitivity 85.8dB Frequency Response 23 - 0.15k Hz RMS Power Range (Watts) 75-400 Peak Power Handling (Watts) 800 Top Mount Depth (inches) 5 11/16 Bottom Mount Depth (inches) 6 1/4 Cutout Diameter or Length (inches) 11 3/16 Vas (liters) 77.01 Fs (Hz) 56.2 Qts 0.45 Xmax (millimeters) 12.2 Parts Warranty 1 Year Labor Warranty 1 Year
Taken from crutchfield.com
And for alt..whatever a '96 Ford F-250 PowerStroke Diesel has, so that shouldnt be a problem at all for thats a Heavy Duty Work Truck.
bdm
Posted on
if your looking for a cheap amp I would go for the sony xplod 1200. But if your looking for quality and dont mind spending the money I would try for the mtx 81000d, you wouldn't need that much power but you could set your gains low and if you ever wanted to upgrade your subs it shuldn't be a problem.Just take a look at them, it's all on self opinion.