|
New member Username: KodakmomentPost Number: 1 Registered: Aug-09 | Hello , Yall i have Alpine Type R - DVC 4ohm . and i have a TMA 500.1 Amp . i current got it wired up at 4ohm . but i was wondering if there is a way to wire my sub at 2 ohm . a diagram or picture would help me along |
|
Bronze Member Username: Cal1089Post Number: 45 Registered: Jul-09 | 1 DVC driver with Voice Coils in Parallel Connecting the two voice coils of the driver in parallel (+ to +, - to -) will result in the following impedances: Dual-6 Ohm Subwoofer: 3 Ohms Dual-4 Ohm Subwoofer: 2 Ohms Dual-2 Ohm Subwoofer: 1 Ohms Dual-1.5 Ohm Subwoofer: 0.75 Ohm http://mobile.jlaudio.com/support_pages.php?page_id=161 |
|
Gold Member Username: 04redmach1Www.rdaudio.net, GA USA Post Number: 2612 Registered: Mar-06 | Can't wire D4 to 4 ohm unless you are running 1 coil. Wire parallel for 2 ohm. |
|
Bronze Member Username: JbpittPittsburgh, Pa. Usa Post Number: 36 Registered: Jul-09 | the12volt.com Just punch in how many an what ohm sub, it will do the rest. |
|
Gold Member Username: Hittin1TEAM REVOLUTION, La. Lake Charles... Post Number: 3741 Registered: May-07 | http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=1&I=42 |