Acoustic Elegance AV15

 

Silver Member
Username: Bumpin_buick

Appleton, Wisconsin USA

Post Number: 277
Registered: Apr-07
I wasn't sure if any of you guys were aware of this company, based out of Green Bay, WI. Everything is machined and assembled in house besides the ferrite and baskets, all though the baskets will soon be machined in house as well. The owner John Janowitz has over a decade of experience at building subwoofers. He worked with Thilo at TC Sounds/Audiopulse and developed several technologies for subs such as the LMS coil and helped tool the first TI motors which are now widely used on 4" VC motors. Well John makes a 500w SQ sub that he had some people speculating against so he came down to me for a few days to test it out. Everything is hand tooled to the .0005" which I found pretty impressive. Single medium strength nomex spider and a 2.5" flat wound copper coil. We did a direct drop in test to one of my SPL test boxes. Which is a 4.5cube box tuned to 45hz. Heres some pics and vids, I will allow those to do the rest of the talking.

Heres a pic of Nick Barnett basement that John just finished up using some of his subs. Nick is super happy with it.
http://i213.photobucket.com/albums/cc256/usask8er1/PICT2862.jpg
The sub
http://i213.photobucket.com/albums/cc256/usask8er1/IMG_4206.jpg
http://i213.photobucket.com/albums/cc256/usask8er1/IMG_4204.jpg

Playing through tones
http://s213.photobucket.com/albums/cc256/usask8er1/?action=view&current=MVI_4193 .flv
A bassrace average with a bad start
http://s213.photobucket.com/albums/cc256/usask8er1/?action=view&current=MVI_4195 .flv

After the TL testing we did some real testing.
Sensitivity plot
http://i213.photobucket.com/albums/cc256/usask8er1/AV15H-4-close_mic.png
Frequency plot
http://i213.photobucket.com/albums/cc256/usask8er1/AV15X_5cf_tunings.png
Flat response in vehicle with transfer function
http://i213.photobucket.com/albums/cc256/usask8er1/escort_tf.gif
 

Gold Member
Username: Jakeyplaysbass

St. Louis, MO / ASU

Post Number: 3623
Registered: Jul-05
Great looking sub.

Nicks basement is pretty insane.
 

Bronze Member
Username: A12voltman80

St. paul, Mn Usa

Post Number: 45
Registered: Feb-09
Is there a reason the cone doesn't meet the the spider to make a strong joint? or is it that they just did not want to pay for the proper tooling?
 

Silver Member
Username: Bumpin_buick

Appleton, Wisconsin USA

Post Number: 278
Registered: Apr-07
They tool it all here by hand, so money wouldnt be the issue, im not sure but I can ask John the owner. DD Zs do the same thing though and im sure its not because of that.
 

Bronze Member
Username: Roman_noodles

Balling, Usa Usa

Post Number: 69
Registered: May-09
I am on CAF and I would not call it "speculating against" when EVERYONE he sold the woofer to had issues and were sent back to be waiting 3 months for repair.
 

Silver Member
Username: Cozce

St. Louis ILLside, Pronounced: ... U.S.A.

Post Number: 764
Registered: Mar-08
cool john
 

Silver Member
Username: Bumpin_buick

Appleton, Wisconsin USA

Post Number: 279
Registered: Apr-07
John once again you sir are an idiot, do not ruin yet another thread on this forum. Lets lay the facts out. Three, count them three woofers had been blown between two people. Three out of several hundred is not EVERYONE. You sir need to learn how to count. Also one sub broke due to a failure point in the spider. Not even sure the last sub is broken.

The user described it as what could only be known as using a DC current, he claims the subwoofer is broken because it only moves one direction. There is no possible way to break a sub so it only moves one direction, that is caused when an amp has failed to the point where it only puts out DC.
 

Silver Member
Username: Wickedbass

Nashville, Tn

Post Number: 701
Registered: Jan-08
Good lookin' sub man. And that basement is friggin' sweet!
 

Silver Member
Username: Bumpin_buick

Appleton, Wisconsin USA

Post Number: 280
Registered: Apr-07
Thanks, more testing will be done this next week with the one sub that had reported problems but I am 99% sure it is the guys amp.
 

Gold Member
Username: Big_edge_head

Milwaukee, WI

Post Number: 3927
Registered: Mar-07
You should see if you can grab one for the next show.
 

Silver Member
Username: Bumpin_buick

Appleton, Wisconsin USA

Post Number: 281
Registered: Apr-07
I beleive John will actually be coming down with me to the Manitowac show, you can meet him in person. Hes a really cool guy and im sure he will bring some demo subs. The subs were designed for HT builds but he has enough faith in them that hes been having me test them to SPL subs for car audio.

I would love to see you do a drop-in test against the revo, it would be an interesting matchup. All though the revo will win on the sexiness scale lol.
 

Gold Member
Username: Big_edge_head

Milwaukee, WI

Post Number: 3928
Registered: Mar-07
Yeah that would be interesting. I'd definitely be up for a drop in test with the Revo.
 

Bronze Member
Username: Sundownz

Mooresville, NC USA

Post Number: 73
Registered: Nov-06
Nice looking sub.

I've talked to John at AE on several occasions and he is a very knowledgeable guy.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us