|
Silver Member Username: Armykyle1Ms Us Post Number: 571 Registered: Dec-08 | BXi2608D what do you think this thing will do if it can? If it could the gain will be set low, all I need is about 1700watts-1900watts. I'll be running 3 D2s subs, what do you guys think the final load will be when its all hooked up. Subs are RL-i 10s |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2756 Registered: Oct-07 | why. I wouldnt go with hifonics if it were me. but that's just me. |
|
Silver Member Username: Armykyle1Ms Us Post Number: 572 Registered: Dec-08 | I can get a good deal on it. And if it works it works, even if it is over rated. I read a few threads about ppl getting rated power out of that amp @ 14.4 less at than rated at 12 of course. If it will go below 1ohm then I'll get it, if not then I wont. I wouldn't be able to get the saz-2000d on the sale price right now. How much would you be willing to add to the trade with the amp? |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2757 Registered: Oct-07 | you name the price. not i. |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2758 Registered: Oct-07 | 40 bucks on top of shipping? |
|
Gold Member Username: DeadrabitMarionville, MO Post Number: 1802 Registered: Jun-07 | it will be fine at low ohms. a freind of mine runs his lower ohm daily and has for a year |
|
Silver Member Username: Armykyle1Ms Us Post Number: 573 Registered: Dec-08 | thats it? |
|
Silver Member Username: CozceSt. Louis ILLside, Pronounced: ... U.S.A. Post Number: 741 Registered: Mar-08 | .66 before or after imp rise?? |
|
Silver Member Username: Armykyle1Ms Us Post Number: 576 Registered: Dec-08 | before. The ohm load will be .66 on paper |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3337 Registered: May-07 | good luck, I wouldn't do it. |
|
Silver Member Username: Armykyle1Ms Us Post Number: 589 Registered: Dec-08 | I wouldn't name my kid mark either but your parents did it lol |
|
Gold Member Username: B3n07Louisville, Ky USA Post Number: 1087 Registered: Jul-07 | all you can do is try it if it gose to protect shut it off |
|
Silver Member Username: Armykyle1Ms Us Post Number: 591 Registered: Dec-08 | I lied its .67 so like .80 with imp rise? |
|
Silver Member Username: Bumpin_buickAppleton, Wisconsin USA Post Number: 235 Registered: Apr-07 | whats the real read on the subs. My guess is the coils will read around 1.4-1.6 as very few companies do exact readings. This way it kinda counters the impedance rise, also are you just guessing on .8 with impedance rise or have you checked it with another amp? Just curious, as that will help me give you a better answer. |
|
Silver Member Username: Armykyle1Ms Us Post Number: 592 Registered: Dec-08 | it was a guess. I put my dmm on each coil last night, 4.6-4.8 I wired all the subs up, no amp though, and I came up with 1.2. So I'm pretty sure I'll be fine |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3343 Registered: May-07 | did you also check to resistance of your DMM to get those readings on the coils? On the same DMM settings touch the red and black probes together and subtract that reading from each coils readings. i'll bet that you get .6 to .8 ohm reading when you do what I'm talking about. If not then those coils may have problems |
|
Bronze Member Username: AllthingzaudioA - TOWN - WEST-END, GA USA Post Number: 99 Registered: Jul-08 | you could but how long to them amps last when pushed hard? |
|
Gold Member Username: SomedonniedudeIllinois Braaap MX Post Number: 2624 Registered: May-07 | "all you can do is try it if it gose to protect shut it off" Unless it blows first, then it will shut itself off haha. "I read a few threads about ppl getting rated power out of that amp @ 14.4" Bench results with a scope? or people using a clamp and dmm? |
|
Silver Member Username: Armykyle1Ms Us Post Number: 593 Registered: Dec-08 | yeah, I got .7-.8. so do I need to subtract that from each coil or the over all ohm load? On the testing, I read one bench test I believe 2701 @ 14.4v 2621 @ 13.8v or something and 2450 @ 12.2v another one was 2589 @ 14.4v 2501 @ 13.8 But if its over 2k I really dont care. I don't need that much. |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2766 Registered: Oct-07 | Sundown SAZ-2000D ftw. |
|
Silver Member Username: Armykyle1Ms Us Post Number: 594 Registered: Dec-08 | if I had the 485 to get the pre order price I would lol. I found another test and it did 2589 @14.4v |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3348 Registered: May-07 | why worry about such a low ohm load. Wire them in series, parallel for a 1.34 ohm lload. should still be close to your 2000 wrms. plus amp will be better off. That seems to make the most sense to me. |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3349 Registered: May-07 | ohhhhhh snap.. Are those Yanks old subs?... He really likes SS subs.. I mean REALLY likes SS subs... be sure to check for stains on the cones.. If he didn't clean em up, you could probably just scrape the j!zz off if you are carefull.. lmao j/p |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2769 Registered: Oct-07 | Yanks never owned Rl-i's. |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3351 Registered: May-07 | lol well fack.... I know someone on here was selling them, my memory is slippin' in my old age, i guess. |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2771 Registered: Oct-07 | was the M dude. He's mostly over at j-designs. member? |
|
Silver Member Username: Armykyle1Ms Us Post Number: 595 Registered: Dec-08 | show me how the wiring setup looks that ur talking about? |
|
Silver Member Username: Armykyle1Ms Us Post Number: 596 Registered: Dec-08 | Heck I might just wire it to 2.67, and listen to it like that for a while so how I like it. |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3356 Registered: May-07 | where are you getting 2.67 as a possible impendance? the next option would be 3 ohm then 12 ohm http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=22 |
|
Silver Member Username: Armykyle1Ms Us Post Number: 597 Registered: Dec-08 | lol sorry, I put D2s..... They're D4s |
|
Silver Member Username: Armykyle1Ms Us Post Number: 598 Registered: Dec-08 | do I subtract the .7-.8 from the over all ohm load? |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3357 Registered: May-07 | you are in the same boat i am in, if you run them paralleled all the way, you are looking at ~.34 ohm before imp rise, which I will be doing for burps and 1.34 for daily. The .34 or so load is absolutely out of the question for the hifonics amp. |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3358 Registered: May-07 | !@#$%!#$@%!#@$%!@#$ d4's changes everything. sonofa...lol nvm go with what you know. |
|
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 3359 Registered: May-07 | As for the .7 DMM reading. If you have all subs wired together then you are looking at the ohm load, then you would subtract .7 from that. But if you are reading each coil individually then you would subtract it from each reading. |
|
Silver Member Username: Armykyle1Ms Us Post Number: 599 Registered: Dec-08 | so it'll be like .95 I don't think that should be a problem. Thanks guys |