Hifonics Brutus 1210d and 2 12" kicker cvr

 

New member
Username: Wackzirth88

K-town, Il U.S.

Post Number: 2
Registered: May-09
I have 2 kicker cvr 12s 2 ohm 400 rms each and a hifonics brutus 1210d. i have it wired at a 2 ohm load which i believed was pumping 900 rms. But since ive been looking into ways to improve my system im seeing alot of people are saying hifonics brutus are overrated. Ive seen that they only push 800-900 watts rms at 1 ohm load. Im wondering if i wire my subs to 1 ohm, adjust my gains.Can the subs handle it? or good chance theyll blow. i definately dont want that but i do want as much bass as i can get with what i have.
 

Silver Member
Username: Poprocks

Post Number: 131
Registered: Mar-09
It cant happen
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2573
Registered: May-07
You cannot wire your subs to 1 ohm.
 

Silver Member
Username: Vivi2000

Owosso, Mi

Post Number: 176
Registered: Aug-07
if you have 2 subs wired to a final independance of 2 ohms that means they are d2 subs. You need 4 ohm dvc subs to get to 1 ohm.
 

New member
Username: Wackzirth88

K-town, Il U.S.

Post Number: 5
Registered: May-09
im new at this and dont know much but what if i wired my voice coils parallel and my subs parallel. wat ohm load would that make?
 

New member
Username: Wackzirth88

K-town, Il U.S.

Post Number: 7
Registered: May-09
nevermind that last question. it'd be .5 ohm load and would fry my amp. thanks for info
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us