Like

New moofer *PICS*...... and suggestions welcome!

 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2555
Registered: May-07
Picked up a little something today...

Upload
Upload
Upload
I don't think there is enough glue on the spidr landings...
Upload
^Next to an RE 8" and a Vifa 3.5"

Special shootout to JK, Rob, and Mark for the input in my last thread. And Paul for the vifa woofer! And yes this deserved a new thread lol.


So the APX is in need of a recone. Out of curiosity, what would YOU recone it as???
 

Gold Member
Username: Jkidder

Worlds gunna end, In 2012

Post Number: 4047
Registered: Nov-05
i recommend you recone it to a 18 and continue with the wall idea. single 18 in a wall > single 12 in a wall.

but on a serious note, i played halo for 3 hours tonight and sent you like 25 game invites. it said you were online but i guess not playing?

thanks for the "shootout" haha
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2557
Registered: May-07
D@mn my bad, I was listening to music for a little while, and just left my xbox on when I left.

But ya I'm def feeling an 18". Think I should I just recone it with atomic parts or try a frankenstein? How much power does an APX need to get moving properly and what can they handle daily?
 

Silver Member
Username: Vivi2000

Owosso, Mi

Post Number: 169
Registered: Aug-07
That looks pretty nice, what vehicle is this going into?
 

Gold Member
Username: Jkidder

Worlds gunna end, In 2012

Post Number: 4049
Registered: Nov-05
that depends on what soft parts (coil) are used. you would probably not be able to mechanically overpower that motor.

if you go with atomic recone you prolly need about 1k and im sure it can handle 3k daily no prob
 

Silver Member
Username: Armykyle1

Ms Us

Post Number: 550
Registered: Dec-08
that looks sick

www.j-designs.org
 

Gold Member
Username: Hittin1

TEAM REVOLUTIONLake Charles...

Post Number: 3087
Registered: May-07
how much does the magnet weigh?
 

Gold Member
Username: Rideredder

Cornell, IL USA

Post Number: 1602
Registered: Sep-05
"I don't think there is enough glue on the spidr landings..."



Do post pics of the recone project.
 

Gold Member
Username: Rideredder

Cornell, IL USA

Post Number: 1603
Registered: Sep-05
What is wrong with it anyway? Blown coil? Where do you plan on getting a recone kit for it?
 

Platinum Member
Username: Rovin

1 15 = 149.5 DBs ...Trinidad & T...

Post Number: 14903
Registered: Jul-05
id send it in for a bigger basket ...
 

Silver Member
Username: Armykyle1

Ms Us

Post Number: 553
Registered: Dec-08
X2
 

Silver Member
Username: Purplehase_bong

BC Canada

Post Number: 323
Registered: Apr-04
i remember locally a guy was doing 152db with a single one of those on 7000rms :D
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2558
Registered: May-07
^damn!

I thought he said the coil was rubbing. I'm guessing due to the suspension probably is sitting higher on one side of the basket. 2 different glues on each side of the spider, probably came undone and was a quick fix.

Not sure on the weight, 60lbs??? Gonna wait and get some opinions on softparts. I need to get the mini van going first lol.
 

Gold Member
Username: Hittin1

TEAM REVOLUTIONLake Charles...

Post Number: 3088
Registered: May-07
definitely has potential..
 

Silver Member
Username: Wickedbass

Nashville, Tn

Post Number: 553
Registered: Jan-08
Mmm...beefy!
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2559
Registered: May-07
^It's whats for dinner

Jon- Not sure what vehicle it's going in yet.

So today I free aired it and the coil only seemed to rub bad at high excursion, but even then it wasn't horrible. So I think I am going to glue the dustcap back on and drop it in my 12" box, just for sh!ts and giggles. This sub has a softer spider than a normal APX, so it should do a little better on the 1200w I have on tap.
 

Gold Member
Username: Deadrabit

Marionville, MO

Post Number: 1597
Registered: Jun-07
what size is that?
 

Silver Member
Username: Tiki89

Post Number: 324
Registered: Oct-06
"So I think I am going to glue the dustcap back on and drop it in my 12" box, just for sh!ts and giggles."


...............
 

Gold Member
Username: Tatonka

-[Team Audible Insanity]-

Post Number: 2907
Registered: Mar-07
Pretty nice sub :-)


quote:

i remember locally a guy was doing 152db with a single one of those on 7000rms :D



That is a horrible score lmao
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2564
Registered: May-07
It's a 10".

Today I put a baffle on my 12" box, box is roughly 2.7cf @ 36hz on 1200w. I was actually quite surprised by the output! The coil was making a good amount of noise, I'm just gonna pound the sh!t out of it til she blows. In the low 30 hz range this thing is a little monster! Can't wait until I get more power and cone area
 

Gold Member
Username: Hittin1

TEAM REVOLUTIONLake Charles...

Post Number: 3113
Registered: May-07
Donnie, You are fu<kin' Slackin'!!


C'mon wtf? You know a vid is the least you can do. lol
 

Gold Member
Username: Somedonniedude

Illinois Braaap MX

Post Number: 2565
Registered: May-07
Don't have a video camera. I'll see if I can borrow one, might wait until right before I do a recone and wall socket the bish! The guy at a local shop has a mic, might just see if he wants to mic it on the wall socket lol.

It's not THAT crazy, but it just really suprized the h3ll out of me figuring my circumstances.
 

Silver Member
Username: Purplehase_bong

BC Canada

Post Number: 324
Registered: Apr-04
Nick V how is that a horrible score. its a single 10" on 7000watts.
 

Gold Member
Username: Tatonka

-[Team Audible Insanity]-

Post Number: 2910
Registered: Mar-07

quote:

Nick V how is that a horrible score. its a single 10" on 7000watts.



My trunk car is just as loud on around ~3k with only a 15. I can just imagine what I could do with 7krms and a 10.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us