alarm feature works fine, but does not start by remote, engine cranks though.
here are my connections:
Ignition 1; viper pink wire to tacoma black/yellow wire
Ignition 2; viper pink/white wire to tacoma black /red wire
Accessory; viper orange to tacoma blue red
Starter; viper Violet wire to tacoma black- starter side
starter viper green wire to tacoma black - key side.
Viper 12v red spliced with viper red/white and red black to constant 12v(tacoma white)
Here is what i think is WRONG. while cranking only ignition one wires show 12v, ignition 2 shows nothing. I just wanted to narrow this down so jumped a constant 12v to ignition 2 and it started right up but i know this is not right! It helped to know that this is what needs fixing but how to do this?