New member Username: Mbyte
HudsonU.S.A
Post Number: 1
Registered: Nov-08
|
Posted on I have 2 dual 2ohm DVC subs and a 2-channel amp. I was wondering if anybody could tell me how to wire them to get 1 ohm if it is possible} |
Gold Member Username: Southernrebel
Monroe,
Louisiana
Team Audible...
Post Number: 6973
Registered: Mar-04
|
Posted on No...you can not get a 1ohm load from both your subs.
You can get 1ohm from ONE of your subs though.
If you run both subs, you can get 8ohm, 2ohm, or 1/2ohm.
If you plan to run both subs, look for a 2ohm stable amp that will give you the power you need. |
Gold Member Username: 04redmach1
Es DEALER,
GA
USA
Post Number: 2421
Registered: Mar-06
|
Posted on What kind of budget do you have for amp? May can do 2 1000.1's and strap them at 2 ohms 
Kevin |