Looking for an opinion
|
New member Username: MoskillzGf, FN US Post Number: 4 Registered: Aug-08 | Im looking for an opinion on a new amp to power two 12" pioneers. Right now im looking at a Jensen Power Plus 420.http://www.sonicelectronix.com/item_11733_Jensen+Power+Plus+420.html# Or a Visonik V218XT http://www.sonicelectronix.com/item_7125_Visonik+V218XT.html (im leaning more toward the 420)  |
|
New member Username: MoskillzGf, FN US Post Number: 5 Registered: Aug-08 | And by the way im trying to keep it cheap. and get the best for my money. So if you have and other ideas for and amp that will power my 2 12s for under 100 bucks let me know. |
|
Gold Member Username: BonhamdPost Number: 1034 Registered: Nov-07 | what subs do you have? which model #? VC config? |
|
New member Username: MoskillzGf, FN US Post Number: 6 Registered: Aug-08 | Two 12 inch pioneers i dont know the model number and what vc config is. |
|
Platinum Member Username: InsearchofbassPost Number: 10390 Registered: Jun-04 | vc means voice coil Also what is the rms power rating not peak power? It can be a single voice coil or possibly dual voice coil. Usually they are 4 ohms. We need to know this so we know what amp to recommend. Dont buy either of the amps you mentioned we can do better. |
|
New member Username: MoskillzGf, FN US Post Number: 7 Registered: Aug-08 | Ok then well both of the subs are coming out on the same output if that helps any and i dont have anymore then 100 dollars to spend. also my friend had them hooked up to a 1000 watt insignia and they hit nice. |
|
New member Username: PlanetzanyLondon UK Post Number: 2 Registered: Sep-08 | Hi all, Sorry for venturing off the same subject here for a moment, but at the risk of sounding a complete clod, I thought I would enlist the help of anyone knowledgeable in these forums in the subject of step down transformers. I was thinking of buying a Marantz 2270 from a USA dealer. I'd be so grateful if anyone here might give me a guideline as to which step up transformer I would need to buy to enable me to use it in the UK? The only other transformer available to buy is the second one below, which doesn't give ampage. I may also wish to run more than one Marantz receiver. I have no idea of the ampage or wattage though! _______________________________________ HEAVY DUTY 240V TO 110V CONVERTER FOR LARGER LOADS STEP DOWN TRANSFORMER 1000 watts, 8.30 Amps 1500 watts 12.5 Amps 2000 watts 16.6 Amps 3000 watts 25 Amps _______________________________________ 240V TO 110V CONVERTER 100 TO 300 WATTS STEP DOWN TRANSFORMER 300 watts 500 watts So grateful for any help anyone can give here. From a very "novice" novice! |
|
New member Username: MoskillzGf, FN US Post Number: 8 Registered: Aug-08 | http://www.amazon.com/Legacy-LA770-1000W-Channel-Amplifier/dp/B0002BEZTY what about this one? |
|
Platinum Member Username: InsearchofbassPost Number: 10401 Registered: Jun-04 | You still didnt give us the information we need but dont buy any of those amps even if they do match the ohm load you need later they are junk. If I had to guess they are single 4 ohm voice coils but we have to know for sure. Can you give us a web link of your subs? |
|
Gold Member Username: CtmikeCt. Post Number: 6480 Registered: Feb-06 | crap amp. and post the voice coil of the subs, and the rms of them (liked asked before). if you have to, pull one of the subs out of the box and look since you can't post the model #. |
|
New member Username: MoskillzGf, FN US Post Number: 9 Registered: Aug-08 | Where do i find the model number? |
|
New member Username: MoskillzGf, FN US Post Number: 10 Registered: Aug-08 | Ok so well here is what i have TS W30SC AIMANT 2350g 4 oms impedance Other that made in Mexico that's what it says on the back of the subs And now my subs arent pushing any bass at all dose anyone have an idea? |
|
Bronze Member Username: MoskillzGf, FN US Post Number: 11 Registered: Aug-08 | i bought the subs from a friend. |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 5481 Registered: Dec-05 | well bro i still don't have complete information but i think you need around 500-600w rms at 2 ohms, if you want a lil more grab a zx 750.1 until you give us some useful info to work. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics