Anl Fuse Holder

 

Silver Member
Username: Audiosaab

Potomac, MD

Post Number: 181
Registered: Nov-07
Hey, So i recently upgraded my power and ground wires to the car from 8 gauge to 4 gauge wire (seeing as how my amp wants 4 gauge)....during this time i also went and bought a 150amp anl fuse and a new fuse holder.... now seeing as how i had never installed this the first time myself and such i am unsure where i need to connect wires under the hood again.

Does it go Pos Battery to Fuse, the Fuse To Wire going through firewall to the trunk?

thanks
 

Gold Member
Username: Somedonniedude

Illinois United States

Post Number: 1707
Registered: May-07
Yes, thats correct. 150a seems a little big for 4ga, but If it is true 4ga you might be ok.
 

Silver Member
Username: Gibsonguy

Storrs, CT USA

Post Number: 167
Registered: May-08
sounds right...also, remember the closer the fuse is to the battery the better.
 

Silver Member
Username: Audiosaab

Potomac, MD

Post Number: 182
Registered: Nov-07
yeah its streetwires 4ga and ill make it as close to the batt as possible gib....thanks guys :-)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us