Tinsel lead snapped...help

Jamie Gold Member Username: Volfenhagking1600 SSD Wangin, Shawano, Wis... USA Post Number: 1213 Registered: Oct-06	Posted on Saturday, May 17, 2008 - 20:03 GMT The tinsel lead on my SSD broke... Could i solder it back on or wouldnt that be effective?
¤Jack_ké££iñgoñ¤ Gold Member Username: Frkkevin Resonant Engineering..., Fort Worth... Email Post Number: 5091 Registered: Nov-05	Posted on Saturday, May 17, 2008 - 20:18 GMT you can try solder.. odds are itll break again.. must be a bit too short
want to see a donkey show? New member Username: Fred_the_axe_murderer Post Number: 5 Registered: May-08	Posted on Saturday, May 17, 2008 - 22:12 GMT i fixed a sub with a broken tinsel by pulling a tinsel out of a factory 6x9 and soldering it in so it was 1/4 in longer than the original.
Troy Jones Gold Member Username: Tejcurrent Post Number: 1356 Registered: Apr-07	Posted on Sunday, May 18, 2008 - 02:50 GMT ^ don't do that. Try soldering it.
P. rick Silver Member Username: Surferdude9371 Im BTL Bumpin Post Number: 920 Registered: Mar-07	Posted on Sunday, May 18, 2008 - 17:51 GMT soldering works fine i did that with my solo x alot and they always held up
Jamie Gold Member Username: Volfenhagking1600 SSD Wangin, Shawano, Wis... USA Post Number: 1215 Registered: Oct-06	Posted on Tuesday, May 20, 2008 - 20:19 GMT thanks guys
Stavenmist316 Gold Member Username: Big_edge_head Milwaukee, Wisconsin Post Number: 2188 Registered: Mar-07	Posted on Tuesday, May 20, 2008 - 20:22 GMT so, did you fix it?
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 16700 Registered: Jun-06	Posted on Wednesday, May 21, 2008 - 01:17 GMT Is it just me or does it seem if the tinsel broke and it appears it's because it was too tight to begin with how is soldering it back on anything more than a band-aid? Unless you decrease the stress in the lead it's almost surly going to break again. No?
P. rick Silver Member Username: Surferdude9371 Im BTL Bumpin Post Number: 945 Registered: Mar-07	Posted on Wednesday, May 21, 2008 - 01:52 GMT i ad on wire
Jamie Gold Member Username: Volfenhagking1600 SSD Wangin, Shawano, Wis... USA Post Number: 1217 Registered: Oct-06	Posted on Wednesday, May 21, 2008 - 21:57 GMT it worked for a day now im stuck with the same problem... solder doesnt wanna stick to the wire either

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us