Bronze Member
Username: Trevor_r Bastrop,
L.A
Us
Post Number: 73 Registered: Jul-07
Posted on
Monday, May 12, 2008 - 21:05 GMT hey guys i was wonderin about how many watts rms will a zx 2500.1 do at 1.4 ohm thnx guys!!!
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 898 Registered: Aug-07
Posted on
Monday, May 12, 2008 - 21:27 GMT dont run that amp lower than 2ohms.
Gold Member
Username: Extrmndor3 Http://illuzonemu.serv...,
^^^Sick Game
Post Number: 7918 Registered: Feb-06
Posted on
Monday, May 12, 2008 - 21:30 GMT why??? they run better at 1 ohm than 2 ohms.. expect around 3.2k rms-3.8rms depending on your voltage on 1 ohm
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 899 Registered: Aug-07
Posted on
Monday, May 12, 2008 - 21:33 GMT i heard that the zx series amps shouldnt be lower than 2ohms...
Gold Member
Username: Extrmndor3 Http://illuzonemu.serv...,
^^^Sick Game
Post Number: 7919 Registered: Feb-06
Posted on
Monday, May 12, 2008 - 21:51 GMT well if u aint got the charging nto even at 2 ;) but those are some good azz amps i went tru like 5 kx and like 2 zx same board diferent heatsink but man they kick azz
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 900 Registered: Aug-07
Posted on
Monday, May 12, 2008 - 22:06 GMT so if they are so good a lower than rated ohms, why did u go thru so many amps???
Silver Member
Username: Dsmith07 NC
Http://com4....
Post Number: 800 Registered: Jun-06
Posted on
Monday, May 12, 2008 - 22:08 GMT Very good question...
Gold Member
Username: Extrmndor3 Http://illuzonemu.serv...,
^^^Sick Game
Post Number: 7920 Registered: Feb-06
Posted on
Monday, May 12, 2008 - 22:14 GMT first i was going to do 4 kicker kx2500.1 on 6 12s but i did not had the charging system.. so i had them here laying around.. then i trated 2 re audio sx 12s to killa from this forum for a zx2500.1 and i got a refurbished zx2500.1 from ebay since i wanted to match 2 zxs.. my system got stolen one of my zx got stolen and my 6 12s so i had left 4 kx and 1 zx sold afew to my cousins to get the crystal and repair the garage since they broke my garage door and my trucks windows and right now i have left 1 kz2500.1
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 901 Registered: Aug-07
Posted on
Monday, May 12, 2008 - 22:48 GMT ahhh gotcha, so you didnt blow them going lower than their ohms. it sounded like u were saying "ya they love going lower than 2ohms, i just keep blowing them" lol
Gold Member
Username: Loc_out Santa Ana,
Ca
Resonant Eng...
Post Number: 2072 Registered: Feb-05
Posted on
Monday, May 12, 2008 - 23:35 GMT Rob did you say you sold them to buy crystal that's not good carnal. j/k
Bronze Member
Username: Trevor_r Bastrop,
L.A
Us
Post Number: 75 Registered: Jul-07
Posted on
Tuesday, May 13, 2008 - 01:04 GMT so what did they do for you at 1ohm power wise more that 2500 rms or what ? u said u ran them on 1 ohm ?????????? about how much power rms?????
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 903 Registered: Aug-07
Posted on
Tuesday, May 13, 2008 - 01:13 GMT that amp puts out MORE than 2500 rms at 2ohms. kicker underrates their amps. i bet you would get ~2700rms at 2ohms. how much power do you want at 1ohm?? why not just buy an amp thats rated at 1ohm and not risk ruining a perfectly good amp???
Bronze Member
Username: Trevor_r Bastrop,
L.A
Us
Post Number: 77 Registered: Jul-07
Posted on
Tuesday, May 13, 2008 - 01:17 GMT i got a 9515d trying 2 get as much power out of it as poss.
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 904 Registered: Aug-07
Posted on
Tuesday, May 13, 2008 - 01:26 GMT whats the vc config?
Gold Member
Username: Safe_cracker Chicago,
IL
US
Post Number: 4500 Registered: Jan-06
Posted on
Tuesday, May 13, 2008 - 01:48 GMT You won't even notice a difference, the power supplies are regulated, might gain 200-300 rms, not even audible. Polo.
Gold Member
Username: Extrmndor3 Http://illuzonemu.serv...,
^^^Sick Game
Post Number: 7922 Registered: Feb-06
Posted on
Wednesday, May 14, 2008 - 18:36 GMT at 2 ohms they were rated at 2960 rms yes they are regulated but it was totally giving me around 3500-3600 rms easy at 1.333 ohms those are the shyt one of the best amps u can get not regular korean made amps that cant take the heat...
Gold Member
Username: Safe_cracker Chicago,
IL
US
Post Number: 4515 Registered: Jan-06
Posted on
Thursday, May 15, 2008 - 01:48 GMT How did you measure the impedence and where also when? Polo..
Silver Member
Username: Drant19 DUB-C,
TX
Post Number: 930 Registered: Aug-07
Posted on
Thursday, May 15, 2008 - 02:03 GMT 3500-3600rms??? thats pretty sketchy/iffy... x2 what Polo said
Gold Member
Username: Extrmndor3 Http://illuzonemu.serv...,
^^^Sick Game
Post Number: 7924 Registered: Feb-06
Posted on
Thursday, May 15, 2008 - 20:07 GMT 6 subwoofer dual 4 ohm each you can wire them at 1.333 ohm and i was getting close to 3500 rms easy its an estimate but 3500 rms easy at around 15.2 volts that was my voltage
Gold Member
Username: Talon01 Team Revolution ,
Pa
Usa
Post Number: 1279 Registered: Jun-07
Posted on
Thursday, May 15, 2008 - 20:27 GMT "those are the shyt one of the best amps u can get not regular korean made amps that cant take the heat..." i would put my rd 3250.1 up against that amp any day. let me see your amp run at .5 ohm daily or a .25ohm burp 3400w at .5 and close to 4k at .25 at low 13v range and it is korean made. xenon ftw
Gold Member
Username: Th3pwn3r I compensate...
Post Number: 8056 Registered: Jul-06
Posted on
Thursday, May 15, 2008 - 20:30 GMT "i would put my rd 3250.1 up against that amp any day. let me see your amp run at .5 ohm daily or a .25ohm burp 3400w at .5 and close to 4k at .25 at low 13v range and it is korean made. xenon ftw" Well...for the prices you pay between those amps it's not really a fair comparison.
Gold Member
Username: Th3pwn3r I compensate...
Post Number: 8057 Registered: Jul-06
Posted on
Thursday, May 15, 2008 - 20:30 GMT With all the bullshi1t of this thread aside, that amplifier will put out plenty of power for a DD 9515.
Gold Member
Username: Talon01 Team Revolution ,
Pa
Usa
Post Number: 1280 Registered: Jun-07
Posted on
Thursday, May 15, 2008 - 20:43 GMT we were not talking price, we were talking quality and yes both those amps will push that sub good
Gold Member
Username: Tatonka -[Team Audib...
Post Number: 1673 Registered: Mar-07
Posted on
Thursday, May 15, 2008 - 21:15 GMT He ordered a RD 1750 yesterday guys. :p Let the arguing in this thread die lol.
Bronze Member
Username: Trevor_r Bastrop,
L.A
Us
Post Number: 81 Registered: Jul-07
Posted on
Thursday, May 15, 2008 - 22:26 GMT si i did i made a funny lol :P
Gold Member
Username: Loc_out SOCAL2 RE 15 XXX
Post Number: 2086 Registered: Feb-05
Posted on
Thursday, May 15, 2008 - 23:05 GMT Let us know how you like the amp
Gold Member
Username: Safe_cracker Chicago,
IL
US
Post Number: 4523 Registered: Jan-06
Posted on
Thursday, May 15, 2008 - 23:59 GMT "i would put my rd 3250.1 up against that amp any day. let me see your amp run at .5 ohm daily or a .25ohm burp 3400w at .5 and close to 4k at .25 at low 13v range and it is korean made. xenon ftw" ShitSon, I would put my IA40.1 up against bode of yous lOl, If that ain't enough I'll slap my modded Z1a on 16 volt system and take the cake... Polo. F U C K K I C K E R