Help with amp set up

 

New member
Username: Spads8

Post Number: 5
Registered: Apr-08
hey i was just wonderin if i would be able to run my TMA T12S4P at 2 ohms from the amp
 

Silver Member
Username: Drant19

DUB-C, TX

Post Number: 865
Registered: Aug-07
no, that is a single 4ohm sub. u can only run it at 4ohms unless you have a pair of them.
 

New member
Username: Spads8

Post Number: 6
Registered: Apr-08
i do have a pair
 

Silver Member
Username: Drant19

DUB-C, TX

Post Number: 876
Registered: Aug-07
then yes you can run them in 2 ohms. what amp do you have? are you sure that the amp can run in 2 ohms?
 

New member
Username: Spads8

Post Number: 7
Registered: Apr-08
its an mtx tc2002 im pretty sure it can i had it that way with my old mtx sub
 

Gold Member
Username: N2audio

Lawrence, Ks USA

Post Number: 1575
Registered: Mar-04
not bridged at 2 ohms, at least you're not supposed to. Like most 2/4 channel class a/b's it's only supposed to be 4 ohm stable when bridged.
 

New member
Username: Spads8

Post Number: 8
Registered: Apr-08
it has two 2ohm out puts and can be bridged to 4ohms. should i leave it at 4ohms or put it to 2ohm?
 

Silver Member
Username: Drant19

DUB-C, TX

Post Number: 880
Registered: Aug-07
your only option is to have 1 sub per channel that way you can hook them up at 4ohms
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us