Help Me Decide

 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9421
Registered: Jul-06
About a month ago, I was set on my new equipment. I was going to buy a set of the JBL GTi comps, an Audison LRX 1.400, an Audison LRX 2.500, and a box from Woodlawn. All in all, this would cost me say $1200.

Lately, I've come to the decision that I want to buy another 15" Mag. Then I would buy a Mmats 2100.2 for the Mags which would run me about $750. I would buy the same comps but buy a different comp amp, something around $300, which would probably be of less quality than the Audison. Then I would have to buy a box from Woodlawn, which we are unsure if we can do 2 15"s ported tuned to 30hz in my trunk, might have to be sealed. All in all, this road would cost say $1600.

Another route I have considered is trying 2 12" or 2 15" IA Flatlynes off a Mmats 2100.2. Again with the same set of JBL GTi comps with a $300 amp for them. Not sure on the price but I believe this route would be the most costly.

Everyday, I think about which way to go and everyday is different.

So route would you go? Either way, I know I'll be happy and I know I'll have solid equipment across the board this time around. I also am almost positive which way everyone is going to say to go but I just want to see what everyone has to say and to see if I may have overlooked anything.
 

Gold Member
Username: Joebruce

Mach5Audio M...

Post Number: 2014
Registered: May-04
I say 2 15" Mags sealed.


the twiztid kid
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9426
Registered: Jul-06
Would it be 2 15" Mags ported if I could fit them Twiz?
 

Gold Member
Username: Joebruce

Mach5Audio M...

Post Number: 2016
Registered: May-04
Yea if you have the room then I say ported.
 

Gold Member
Username: Ctmike

Ct.

Post Number: 6022
Registered: Feb-06
i say wait for the new mags to come out and run a pair of those.

but if not those, try the flatlynes.
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9428
Registered: Jul-06
I've considered the new Mags Mike. But I have read that they really prefer to be sealed as opposed to ported. Although it is very tempting to try out the new drivers, especially at that price. The low end seems to be incredible on them with the xbl^2 motor they have. Also they are the best sounding MAG from what I've read.

The Flatlynes look real solid but I honestly don't know much about them. The sq on them seem to be real good from what I've read so far. Only thing I didn't like about this sub is the low efficiency but it really shouldn't be too big of a problem at all.
 

Gold Member
Username: Ctmike

Ct.

Post Number: 6023
Registered: Feb-06
get the new mags!:-)

and where have you read reviews on the flatlynes? on thier forum?

but imo, try a setup that hasn't been already done. that's why i'm going to go with a ixl 10, maybe 12, when they come out:-) (if all goes well).
 

Gold Member
Username: •cam•

BC Canada

Post Number: 2455
Registered: Nov-06
I thought of suggesting the IXL line. A pair of the 15s only needs 6 cubes ported according to the recommendations.
 

Gold Member
Username: Big_edge_head

Milwaukee, Wisconsin

Post Number: 2011
Registered: Mar-07
So you have a HO alternator already?
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9429
Registered: Jul-06
"So you have a HO alternator already?"

Not getting one. Doing big 3, upgrading the battery, and hoping for the best lol. Seriously though, I think I'd be fine. Right now, I have no problems. I'll install a voltage meter up front with me and watch the voltage and if its bad, then I'll cut my losses and change things up.

The only review of the Flatlynes I have read is on SSA.
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9442
Registered: Jul-06
Bump for more opinions
 

Gold Member
Username: Ctmike

Ct.

Post Number: 6025
Registered: Feb-06
you could do a pair of oz audio me 10"s ported. would be a real nice setup if you never heard them, and they can be had for under $400 for the pair now which is a steal.

just throwing you another option though, but i still say a pair of new mags!
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9445
Registered: Jul-06
Mike, you got a link to those subs?

I've seen you mention them before but I honestly have heard nothing about them.
 

Gold Member
Username: Joebruce

Mach5Audio M...

Post Number: 2020
Registered: May-04
How much are the new Mags gonna be?
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9446
Registered: Jul-06
$275 shipped I believe.
 

Gold Member
Username: Ctmike

Ct.

Post Number: 6026
Registered: Feb-06
$225 shipped for the new mag. last i saw.

and the oz me:
http://www.ozaudio.com/pages/products.html
 

Gold Member
Username: Joebruce

Mach5Audio M...

Post Number: 2021
Registered: May-04
Wow $225 shipped?! Thats a good price. Im really considering 1 for my next setup.
 

Gold Member
Username: Denali_on_22s

I get Bucks like Milwa...

Post Number: 5584
Registered: Feb-06
2 15 inch mags in you car would be nasty, dude.
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9463
Registered: Jul-06
Well, hate to disappoint everyone but I am going with Option number 1. Hopefully design some nice looking amp rack for the matching Audison amps.

Reason for this decision is because I don't want to potentially ruin my alt or equipment from voltage drops and because the money I save from this will go to a different project :-)
 

Gold Member
Username: Denali_on_22s

I get Bucks like Milwa...

Post Number: 5598
Registered: Feb-06
that's legit. a little overkill, but should be cool.
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9464
Registered: Jul-06
Overkill on what part Reece?

Just the prices on the amps or what?
 

Gold Member
Username: Talon01

Team Revolution , Pa Usa

Post Number: 1211
Registered: Jun-07
i think you should buy my 3250.1 because i am upgrading very soon. both are for sale btw
 

Diamond Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 20621
Registered: Oct-05
do the 2 15s yanks. take out the spare tire and you will have alot of room. besides when you get a box back there, getting your spare tire would be impossible anyways.
 

Gold Member
Username: Loc_out

Santa Ana, Ca Resonant Eng...

Post Number: 2034
Registered: Feb-05
Yanks I'm currently running a mmats 2100.1 on a stock charging system and it does well IMO.
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9466
Registered: Jul-06
Scott, what price are you looking for on it? And it does 1500 @ 2 ohms right?
 

Gold Member
Username: Talon01

Team Revolution , Pa Usa

Post Number: 1215
Registered: Jun-07
1600w at 2. 700.00 pm your number or call we will talk
 

Gold Member
Username: Nyyfan13

15 MAG USA

Post Number: 9467
Registered: Jul-06
Scott, you got PM
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us