No Power at Factory Harness

 

New member
Username: Lisajory

AB Canada

Post Number: 2
Registered: Apr-08
I need help!! I am trying to install a new deck into my '07 Jeep Grand Cherokee. I have power at the fuse box which is fine but no power at the factory harness... HELP!}
 

Gold Member
Username: Kpa2727

Old Bridge, NJ USA !

Post Number: 1154
Registered: May-07
you have to wire your own, there is no positive wired for a after market on newer gms, 2000 and up need a external positive wire wired in just make sure when you wire up your acc you get 12 volts when the keys on and o with the key off. then wire your normal 12 volt source. after that you should be all good.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us