Like

Big 3 upgrade

 

Silver Member
Username: Deadrabit

Post Number: 352
Registered: Jun-07
i found the wire to the alt to the battery.
but the wire from the battery to the ground and the ground to the chasy seem to be like one wire
it goes from the ground on the battery to the chaise and has a soldered place that grounds it like half way to the wire.
is this right?
its a vw golf 2000 if that helps any one
 

Gold Member
Username: Nd4spd18

Northwest PA

Post Number: 7424
Registered: Jul-06
So? You don't have to run the new wires to the same place as the stock ones. In fact I never do.
 

Silver Member
Username: Deadrabit

Post Number: 353
Registered: Jun-07
i already got it. thanks!
 

Silver Member
Username: Clouduz

Post Number: 338
Registered: Jun-06
sorry to hijack the thread, but for engine ground can i just pick a screw and ground it?
 

Silver Member
Username: Kklagge

San Diego

Post Number: 542
Registered: Dec-04
I would use a bolt on the frame...the ground is the most important part...you're going to the effort so do it right the 1st time.
 

Silver Member
Username: Clouduz

Post Number: 339
Registered: Jun-06
lol well i meant bolt but ok thnx so basically any bolt will work got it
 

Silver Member
Username: Kklagge

San Diego

Post Number: 543
Registered: Dec-04
a bolt on THE FRAME...not just a bolt on a flimsy piece of wheel well or something is your best bet.
 

Silver Member
Username: Deadrabit

Post Number: 355
Registered: Jun-07
my car doesn't have a frame
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us