Very odd question about the w7

Abe Silver Member Username: Longbluesquid Post Number: 182 Registered: May-06	Posted on Monday, April 21, 2008 - 02:39 GMT i wans reading car audio mag and some guy had a 10w7 wired in 4 ohm ( or could even be 2 0hm) with a pdx1000.1 now those amps can be run in 4ohm or 2 ohm not 3 ohm soo im confused on how jl subs work with other amps....
Brad Warren Gold Member Username: The_image_dynamic San Diego, California Post Number: 3873 Registered: Dec-06	Posted on Monday, April 21, 2008 - 02:48 GMT Any amp that is 2 ohm stable can be run at 3 ohms. You simply take half of the amount of difference in watts between its 2 and 4 ohm ratings to get what power you will see at 3ohms. Example: 2 ohms = 1000RMS 4 ohms = 500RMS Your 3 ohm output on this amp will be 750RMS.
Reece Brassler Gold Member Username: Denali_on_22s I get Bucks like Milwa... Post Number: 5446 Registered: Feb-06	Posted on Monday, April 21, 2008 - 02:53 GMT not with the pdx. the pdx produces 1000 watts @ both 2 and 4 ohms. its possible it produces the same power @ 3 and 1 as well.
Abe Silver Member Username: Longbluesquid Post Number: 183 Registered: May-06	Posted on Monday, April 21, 2008 - 02:56 GMT oh ok now this goes for any amp... i didnt know that....
Brad Warren Gold Member Username: The_image_dynamic San Diego, California Post Number: 3874 Registered: Dec-06	Posted on Monday, April 21, 2008 - 03:15 GMT LOL Once again: "You simply take half of the amount of difference in watts between its 2 and 4 ohm ratings to get what power you will see at 3ohms" PDX and some other amps including JL -- Example: 1000-0 = 1000

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us