Easiet way?

zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 110 Registered: Feb-08	Posted on Thursday, February 28, 2008 - 23:26 GMT i have a s-10 xtreme was wondering an easy way to stiffen the roof so it does not rattle cause the rattle is annoying
Kangology 101 Gold Member Username: Dakangofkrunk16 Boca Raton, Florida Post Number: 1217 Registered: May-07	Posted on Thursday, February 28, 2008 - 23:34 GMT i guess some sound deadning like edead or sumtin
zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 111 Registered: Feb-08	Posted on Thursday, February 28, 2008 - 23:38 GMT yeah i called some buddies of mine that work at audio shops they said dynamat will not help the rattling need to stiffen it up somehow it does not take mech all i have to do is put two fingers on it stops so idk
Andrew Capps Gold Member Username: Shortysetnies Rock Vegas, NC US Post Number: 2277 Registered: Mar-06	Posted on Thursday, February 28, 2008 - 23:50 GMT if you could find a way to attach a strip or two of 1/2" metal to it from front to back or side to side under the headliner, I think that would work.
zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 113 Registered: Feb-08	Posted on Friday, February 29, 2008 - 00:50 GMT could i just tac weld it in place you think
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 14346 Registered: Jun-06	Posted on Friday, February 29, 2008 - 00:53 GMT You might see the weld on the outside.
zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 116 Registered: Feb-08	Posted on Friday, February 29, 2008 - 01:08 GMT how would i brace it up then???
No Limit Soldier Silver Member Username: Ska USA Post Number: 531 Registered: Jan-08	Posted on Friday, February 29, 2008 - 01:18 GMT FOAM WIL STOP IT
zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 118 Registered: Feb-08	Posted on Friday, February 29, 2008 - 01:21 GMT cool maybe ill try that when it warms up how thick do u suggest i go with it so i can still pull my head liner back over it
Andrew Capps Gold Member Username: Shortysetnies Rock Vegas, NC US Post Number: 2279 Registered: Mar-06	Posted on Friday, February 29, 2008 - 01:38 GMT if you use expanding foam you can shave it down... Defiantly dont weld it unless you plan on painting it afterwards
zack kraus Silver Member Username: Prozack52 Cincinnati, 2-D615D4 Dia... Post Number: 122 Registered: Feb-08	Posted on Friday, February 29, 2008 - 04:03 GMT so spray the foam in and shave it down until head liner will go back in? any specific spray foam to use
Andrew Capps Gold Member Username: Shortysetnies Rock Vegas, NC US Post Number: 2285 Registered: Mar-06	Posted on Friday, February 29, 2008 - 04:18 GMT I always use DAP. Geat Stuff (thats the name) is good too. BE CAREFUL. This stuff goes EVERYWHERE. I'm being dead serious. Cover EVERYTHING you dont want to get this on b/c once it hits something, its damn near impossible to get off

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us