Amp and Power cap

 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 1
Registered: Feb-08
Alright I got one 12 inch 1600 watt sub and two 2600 watt subs and I was just wondering first off, should I get a power cap, and if so how many farads you think. Then second off, how many watt amp do you think I should get.. I was looking at a 6000 watt amp its just a little frickin spendy. Oh and then I was looking at crossovers and decided that I didnt really need one because I dont have tweeters or middles so yeah. Any help?
 

Gold Member
Username: Volfenhagking1600

SSD Wangin, Shawano, Wis... USA

Post Number: 1209
Registered: Oct-06
what kind of subs do you have (make and model)
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 674
Registered: Feb-07
if ur running 6k rms ur going to need a HO alt not no cap!!!!
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 4
Registered: Feb-08
I don't have them right now there in my car but I know they are Lanzar. I haven't dared hooking it up yet but yeah.
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 5
Registered: Feb-08
So you dont think if I got a 10 or even 50 farad power cap I could run it?
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 675
Registered: Feb-07
tell me all what you are running the amp maker and modle same gose for the sub's!
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 6
Registered: Feb-08
2 Lanzar 15 inch Subs MODEL# OPTI1535D

I Lanzar 12 inch Sub MODEL# MAXP124D

The amp I dont have one yet but I was hoping for suggestions on that.
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 676
Registered: Feb-07
ok are u going to put in all 3 sub? cuz its not good to mix size!! post a link to Lanzar Audio so i can look at the rms and i can tell u what amp u need and are they svc or dvc and what ohm are they?
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 7
Registered: Feb-08
http://www.lanzar.com/itempage.asp?MODEL=MAXP124D
12
http://www.lanzar.com/itempage.asp?MODEL=OPTI1535D
15's
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 9
Registered: Feb-08
and idk ill do whatever works I dont really care i guess
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 677
Registered: Feb-07
ok from looking at that you will need a amp that putting out at lest 3k rms i would just run the 15" this is what u will need! u need a 300 amp alt 2 ext batt 1 new one under the hood i get links up soon and you need a amp puttin out 3,000rms @ 1ohm you got two dvc 4ohm sub's just do the two 15" just to make it easy for you! the amp i would use is a sundown saz-3000D you can get it at low-hz.com Kevin Holden is the owner really good guy! and for the batt i would get

Step 1. Replace your existing starting battery with a Kinetik HC1400 Power Cell or larger for best fit in your exisiting battery holder.

Step 2. Install the following Kinetik HC Power Cells near your amplifier installation:
MODEL QTY
HC1800 2

http://www.kinetikaudio.com/calc.asp

first thing you need to get is a 300 amp alt!!!!!!!!!!!!!!!!

i would get one from http://www.excessiveamperage.com/
Nate is the owner best alt for the money!!

here is the link to sundown
www.sundownaudio.com

now have you got the sub's yet?
 

New member
Username: Coolguy101

Minot, ND Chinka

Post Number: 10
Registered: Feb-08
Yeah I got the subs already so i guess ill just sell the 12" so I can get closer to affording the rest and alright I will look into all that
thanks for the help!
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 678
Registered: Feb-07
and i would do two runs of 1/0 awg power wier the lowist costin i found is http://www.knukonceptz.com/productMaster.cfm?category=KLM%20Kable

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qt y=2&woofer_imp=4
and this is how you need to wier ur sub's the top one!!! you got 2 4ohm dvc they go down 1ohm wierd like that
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 11
Registered: Feb-08
oh alright
and I got one more question, do you think this will be pretty nice or what?
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 679
Registered: Feb-07
well it sounds good so far what car are u puttin them in and what kinda box? i going to google some vid's to see what they can do!
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 12
Registered: Feb-08
Right now ive got a 89 honda prelude si
but in a bout a month im getting a 2006 Mustang gt
so i should be pretty happy
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 680
Registered: Feb-07
ok from lookin at this vid they need more power then what he is puttin on them http://www.youtube.com/watch?v=CgCbOsxrpno
he say he is puttin 2,400 rms on it! so that 3k amp will do u good now the box i thinking ur going ported? if so i look at what size of box u need and what it needs to be tune to?
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 13
Registered: Feb-08
yeah thats what i was thinking,
could you?
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 681
Registered: Feb-07
i can't find what size u need? are u doing this setup for spl or sql?
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 14
Registered: Feb-08
hmm
Sql
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 682
Registered: Feb-07
umm i got work today so i can't call them so u need to call and ask them what size for ur sub's and what to tune it to for daily driving i'm thinking maybe 32Hz is usele what ppl tune there box to i just hope u can fit two 15" in ur car!
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 683
Registered: Feb-07
sql is more spl with sq wich means hard hitting that sounds good
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 16
Registered: Feb-08
haha yeah
 

Bronze Member
Username: Coolguy101

Minot, ND Chinka

Post Number: 17
Registered: Feb-08
Well man thanks for all the help.
And I gotta head out too, but ill call them sometime
Alrighty then thanks tonz
 

Silver Member
Username: Kingandsons07

Lincoln, Nebraska U.S.A

Post Number: 685
Registered: Feb-07
np
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us