Last minuite check up for my box!

Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1213 Registered: Aug-06	Posted on Sunday, February 17, 2008 - 23:39 GMT alright guys im gonna start building my box tommrow and i have design that s 5.2ish cubes net tunes to 32 ish hz for 2 12" sx's. port is 5x12.5 slot port. common chamber theres 6.5 inches form the back of the port opening. port and subs facing the rear bumper. does this seem legit or should i do somthing different? thanks for your help agian guys
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1215 Registered: Aug-06	Posted on Monday, February 18, 2008 - 02:01 GMT any opinions?
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 13762 Registered: Jun-06	Posted on Monday, February 18, 2008 - 02:12 GMT That's a nice deep hz for 12's. Just my $.02.
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1217 Registered: Aug-06	Posted on Monday, February 18, 2008 - 02:14 GMT yea i like the lows. hope i dont lose to much top end tho. on that note should i tune slightly higher or make the box smaller or will 80hz still hit nice with this setup?
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 13766 Registered: Jun-06	Posted on Monday, February 18, 2008 - 02:31 GMT To me 80hz is way high. How did you come up with 32hz for the tuning?
Kyle Longbrake Silver Member Username: Kyle_lowe Post Number: 816 Registered: Apr-06	Posted on Monday, February 18, 2008 - 02:38 GMT i would try to eliminate the "ish"
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 13771 Registered: Jun-06	Posted on Monday, February 18, 2008 - 02:48 GMT
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1218 Registered: Aug-06	Posted on Monday, February 18, 2008 - 04:16 GMT well its going to be very close to 5.1 cubes and 32 hz. is that better for ya kyle? im seriously looking for help here and if you dont have any advice then dont say anything please. so do you guys think my box should work well for the sx's?
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1225 Registered: Aug-06	Posted on Monday, February 18, 2008 - 23:12 GMT iight makin my cut sheet now ill post up pics of the build.
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 13810 Registered: Jun-06	Posted on Monday, February 18, 2008 - 23:31 GMT You sound ready. Waiting on pics.
M.S. Gold Member Username: Nd4spd18 Northwest PA Post Number: 6278 Registered: Jul-06	Posted on Tuesday, February 19, 2008 - 00:41 GMT wtf 80 hz? Your LPF should be cutting off everything from there on up.
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1229 Registered: Aug-06	Posted on Tuesday, February 19, 2008 - 02:27 GMT yea thats exactly what my lpf is set at.
cam Gold Member Username: •cam• BC Canada Post Number: 1936 Registered: Nov-06	Posted on Tuesday, February 19, 2008 - 02:30 GMT He's asking how that frequency will sound and not about tuning to 80 Hz.
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1230 Registered: Aug-06	Posted on Tuesday, February 19, 2008 - 02:33 GMT correct. but its a little latte now cuz ive already mad a few cuts. tommrow i should be ready to assemble.
Quentin Silver Member Username: Kingandsons07 Lincoln, Nebraska U.S.A Post Number: 668 Registered: Feb-07	Posted on Tuesday, February 19, 2008 - 04:20 GMT i want to see some pics
Mark Scafetta Gold Member Username: Mendonmafia USA Post Number: 1235 Registered: Aug-06	Posted on Tuesday, February 19, 2008 - 04:33 GMT well i only got 2 pieces cut tonight so tommrow i will take pics when i start assembly and have the rest of the mdf cut. I gotta show you guys some pics of the sweet @ss circle jig i made for my router too. No more imperfect circles.
Paul Larrea Platinum Member Username: Wingmanalive A pic is worth 1000 posts!! Post Number: 13857 Registered: Jun-06	Posted on Tuesday, February 19, 2008 - 04:34 GMT Yeeeees!!!

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us