What sub or subs for IA40.1?

 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 2
Registered: Jan-08
i just purchased an IA 40.1 and im either lookin for one 18" sub for under $600 or either 2 12's or 2 15's for bout $250-$300 a piece,, i have all the upgrades needed and plenty of room. which way should i go? (i like a lot of spl)
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 3150
Registered: Nov-05
2 15 apx's
 

Gold Member
Username: Drivingreckless

DD 9515f, 148.2 db Mov...

Post Number: 5312
Registered: Apr-06
2 IA DPs
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3814
Registered: Feb-06
two fi. bls, DPs cost a assload now, dave.
 

Gold Member
Username: Drivingreckless

DD 9515f, 148.2 db Mov...

Post Number: 5317
Registered: Apr-06
older ones?
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3816
Registered: Feb-06
no, i was under the impression you were talking new... i would rather buy new
 

Gold Member
Username: Drivingreckless

DD 9515f, 148.2 db Mov...

Post Number: 5319
Registered: Apr-06
i should have been more specific
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 3
Registered: Jan-08
yes new is prefered, i was thinkin maybe one 18" BTL.. would 2 BL 15"s hit harder
 

Gold Member
Username: Southernrebel

Monroe, Louisiana 2 DD3515s, 2...

Post Number: 5886
Registered: Mar-04
How bout a pair of AudioQue HDC's?
They fit your price range perfectly.

Also, you better beef your electrical up!
 

Gold Member
Username: Southernrebel

Monroe, Louisiana 2 DD3515s, 2...

Post Number: 5887
Registered: Mar-04
A pair of loaded BL's would be nice also.
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 5
Registered: Jan-08
they were all out of stock of the hdc3.
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3821
Registered: Feb-06
loaded bls...
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 6
Registered: Jan-08
well the hdc3's are more in my price range than the bl's,, but i can get two 12" re mt's for 299 a piece too,, would those be better than two 15" HDC3's?
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 7
Registered: Jan-08
bump...
 

Silver Member
Username: Kyle_lowe

Post Number: 799
Registered: Apr-06
oh i say get the mt's
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3825
Registered: Feb-06
you don't have enough power for the MTs...
 

Gold Member
Username: 420alldaylong

Post Number: 3234
Registered: Sep-06
Fi BL's
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 8
Registered: Jan-08
so i wouldnt have enuff power for 2 btls or 2 mt's ?
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3828
Registered: Feb-06
not with 1 ia. 40.1 i mean you could go BTL with no options, but i would recommend at least 2500 if not more on an MT
 

New member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 9
Registered: Jan-08
well i was leanin toward the BL's but i see alot of people sellin them off..
 

Gold Member
Username: Tejcurrent

Post Number: 1051
Registered: Apr-07
You'd probably be better off with two loaded BL 15s if you can't fit 2 18s. Shoud do real good for you. I was listening to my bros BL 12 yesterday for the first time in a while and was really impressed with it all over again.
 

Gold Member
Username: Tejcurrent

Post Number: 1052
Registered: Apr-07
You could do 2 btls, but the BLs would like the power better, and be cheaper. Unless you planned on doubling your power down the road I wouldn't go with it.
 

Bronze Member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 11
Registered: Jan-08
ive also been lookin into 2 HDC3 12's or 2 Hcca 12's or 4 HDC3 10's ,,, or should i stick with the BL 15's?
 

Gold Member
Username: Tejcurrent

Post Number: 1055
Registered: Apr-07
BLs.
 

Gold Member
Username: Denali_on_22s

The kids like my rhyme...

Post Number: 3836
Registered: Feb-06
hccas need around 3000 watts a piece to get moving... you could get 1 15 inch HCCA and it would be nice. you could also do the HDC3's they would be nice
 

Bronze Member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 14
Registered: Jan-08
why i keep hearin the
HDC3's over the BL's,, do they handle more power? even tho they are both rated 1000watts per sub..
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 3159
Registered: Nov-05
i thought hdc3 was 2k
 

Bronze Member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 15
Registered: Jan-08
website says 1000 rms and 2000 peak
 

Gold Member
Username: Safe_cracker

Chicago, IL US

Post Number: 4079
Registered: Jan-06
1 IA40.1 on 16V-18V will produce between 6500 and 7500 rms and at 1ohm. Polo.
 

Gold Member
Username: Skibum12189

Cleveland

Post Number: 2557
Registered: Mar-06
i'm from cleveland.... where the fluck is washington courthouse
 

Bronze Member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 16
Registered: Jan-08
i dont hink imma have 16v or 18v, prolly around 14v so ill prolly gettin bout 4000 at 1ohm,, court house is a lil hick town in the middle of nowhere between columbus and cincinnatti
 

Bronze Member
Username: Cheapaudio

Washington court house, Ohio Usa

Post Number: 17
Registered: Jan-08
ok which ones... 2 dd3515's or 2 15" IA DP's?
 

Gold Member
Username: Safe_cracker

Chicago, IL US

Post Number: 4089
Registered: Jan-06
"quoted from scottie johnson

Draw -- 450 amps at 12 volts and 560 amps at 17 volts full tilt.

Power - 3600x1 at 12.8, 4600-4800x1 at 14.4, 7500-8000x1 at 17 volts all at 1 ohm."
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us