|
Silver Member Username: Killer44Ontario Canada Post Number: 974 Registered: Dec-04 | so my brothers got a ext cab s10 and i got two possible set ups to throw in there for him, one thing to keep in mind is that he doesnt want to loose the back fold down seats, so its gunna have to be a normal sized sealed or a smaller ported as not to take up too much room, well heres the amp hes got http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=2961 and heres the first sub (its the one on the top of page, 250rms MMATS SERIES 12") http://www.lightav.com/car/mmats/subwoofers.html and secondly i got three 10" cvrs for him to choose from (two old models and one new) but hes only gunna use one. http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=2448 both subs are dvc 4ohm so i know there gunna work with the amp... last question is that the infinity amp doesnt have a sub sonic filter, and ive never ran a ported box with one, so if i did go ported with either set up, how would i do it? |
|
Gold Member Username: ZacdavisBeloit, Wi Post Number: 1545 Registered: Dec-03 | If the back seats are folded down, then where will your feet go if theres a box there? He should run a small box off to one side and just forget about using one of the seats. |
|
Silver Member Username: Killer44Ontario Canada Post Number: 975 Registered: Dec-04 | well yeah we are considering that as one of our plans and possibly putting some cushion on the box so it could be used as a seat if needed.... |
|
Silver Member Username: Killer44Ontario Canada Post Number: 976 Registered: Dec-04 | bump...anyone? |
|
Silver Member Username: KingtutusLincoln, Nebraska U.s.a Post Number: 142 Registered: Dec-07 | go with the mmats |
|
Silver Member Username: Killer44Ontario Canada Post Number: 977 Registered: Dec-04 | ok anyone other opinions and if i go mmats should i jsut stay sealed b/c the infinity does not have a ssf...? |