Next Audio Comp (texasbasswars)

 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 4431
Registered: Nov-05
Question please ask.

Stereo Sound 232 S.Abrams
Arlington, Tx
Feb. 10th 12pm to 4pm

If anyone is in the DFW area or know someone in that area with a system tell them to bring it
BASIC RULES

Wattage will be determined by the 4 ohm rating of the amplifier.

This will be accomplished by dividing down to the 4 ohm rating.

Example: if an amplifier is rated at 1800 watts rms @ 1ohm then we devide that by half to acheive 900 watts at 2 ohm. Then devide by half again to acheive 450 watts at 4ohm. So the classification of this amplifier would be 450 watts.

You can roll down window, open doors, whatever.

The mic is normally placed in the passanger/driver's side kickpanel, or on the dash. The mic will not be placed anywhere that might cause damage to it.

Only one person allowed in the vehicle while competing.

Engine idle is limited to 2000 RPMs. Each competitor will get one sweep and two run each addititional run will be $5. Once placed in class you will not be moved and only one person in the vehicle will competing. No Exceptions



Classes

SOUND QUALITY

Beginner, Pro, & Expert

SPL Classes


Trunk Classes Amateur & Pro [unlimited watts]


Amateur 0-600 Watts

Amateur 601+ Watts



Pro 0-400 Watts

Pro 401-1000 Watts

Pro 1001+ Watts


Extreme Class 16+ Volts [unlimited watts]

Hertz Class 30-40 [unlimited watts]

Hertz Class 41-50 [unlimited watts]

Hertz Class 51-60 [unlimited watts]


Amateur: One additional battery or One 2 farad of capacitor.

No walls
No more than 14.5 volts
No more than 2 amplifiers

Pro:

Any enclosure design including walls and limited vehicle mods
Unlimited number of amps and batteries. Classes based on wattage.


All Installers And Shop Owners Will Be In Pro Class.

Trophies for 1st & 2nd place in each class trophies for Highest SPL & Best Install.
 

Silver Member
Username: Charlesbhs

Dallas, Tx USA

Post Number: 479
Registered: Jan-07
you sure thats the right address?
 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 4433
Registered: Nov-05
Thats what is on the site. It is kind of weird.. its on the corner of Abrams and 360. You basically exit for Abrams and stay on the service road.. you go through the lights and go straight. Its right on the right hand side.. big yellow building
 

Silver Member
Username: Charlesbhs

Dallas, Tx USA

Post Number: 481
Registered: Jan-07
i looked up the store and it came up with this address.

232 S Watson Rd, Arlington, TX 76010 (Stereo Sound System)
 

Gold Member
Username: Southernrebel

Monroe, Louisiana 2 DD3515s, 2...

Post Number: 5876
Registered: Mar-04
Hey Kevin,

Are their any shows coming up around Tyler or Longview? I haven't really had time to it a comp in and awhile, so I'm overdue.

I plan on rebuilding this weekend...hope my wire and batts get in fri./sat. Gotta order some 6" flares too.

I know there is a double-pts USACi comp in Longview 2/24...I will be at that one for sure. Also, Import FaceOff north of Shreveport is 3/16.

You know of any others?
 

Gold Member
Username: Frkkevin

Resonant Engineering..., Fort Worth... Email

Post Number: 4434
Registered: Nov-05
1st show in longview is Chuckys Conn. 1908 E. Cotton st Longview tx Feb 17th 12pm to 4pm

Charles, it may be watson road but you have to take the abrams st exit but stay on the service road
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us