I need help with this!

Brett justice New member Username: Blaaaahhhhh Warrior, Alabama Usa Post Number: 1 Registered: Jan-08	Posted on Friday, January 18, 2008 - 15:27 GMT I have 2 pioneer preimers and they peak out at 1200 an I'm gettin a 1800 wat amp should I use a my sealed box or my vented on? Please help I really need to know !
lOwLiFe Gold Member Username: Loc_out Santa Ana, Ca Resonant Eng... Post Number: 1593 Registered: Feb-05	Posted on Friday, January 18, 2008 - 15:31 GMT Brett when buying an amp/sub look at the RMS peak means nothing. Do you have a link to the amp?
Brett justice New member Username: Blaaaahhhhh Warrior, Alabama Usa Post Number: 2 Registered: Jan-08	Posted on Friday, January 18, 2008 - 15:56 GMT No but I will have the amp later today its a kenwood 1800 wat 2 channel }}
Brett justice New member Username: Blaaaahhhhh Warrior, Alabama Usa Post Number: 3 Registered: Jan-08	Posted on Friday, January 18, 2008 - 16:20 GMT Hey I got the rms its like 450×2 channels
lOwLiFe Gold Member Username: Loc_out Santa Ana, Ca Resonant Eng... Post Number: 1594 Registered: Feb-05	Posted on Friday, January 18, 2008 - 16:28 GMT Is that 450 @ 2 or 4 ohms?
Brett justice New member Username: Blaaaahhhhh Warrior, Alabama Usa Post Number: 4 Registered: Jan-08	Posted on Friday, January 18, 2008 - 16:34 GMT 4 ohms}
Mark Scafetta Silver Member Username: Mendonmafia USA Post Number: 738 Registered: Aug-06	Posted on Friday, January 18, 2008 - 16:50 GMT either way go ported im not a big fan of sealed boxes personally. if you tune to like 34 hz or less you will still have good lows.
Brett justice New member Username: Blaaaahhhhh Warrior, Alabama Usa Post Number: 5 Registered: Jan-08	Posted on Friday, January 18, 2008 - 17:03 GMT Alrite thanx man!!!}
M.S. Gold Member Username: Nd4spd18 Northwest PA Post Number: 5602 Registered: Jul-06	Posted on Sunday, January 20, 2008 - 04:45 GMT " if you tune to like 34 hz or less you will still have good lows " Not necessarily true, it depends on the sub. Some subs just don't have strong low end. Building the box volume and tuning to what the manufacturer recommends will usually give the best result.
[...Rovin...] Platinum Member Username: Rovin 4 10 Pioneer... Post Number: 12844 Registered: Jul-05	Posted on Sunday, January 20, 2008 - 05:34 GMT pioneer\premier dont seem to like sealed boxes so do ported instead ......

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us