When sound deadening do you have to??
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 469 Registered: Oct-07 | I deadened my 2 front doors are you supposed to deaden the back door too??? And I plan on deadening the trunk really good and I want to do the rear deck but I have no clue on how to get too it... I think I deadened them right I mean it did it double layer in bits and pieces till most of the door was covered in the inside panel and outside but not on the inside of the actual door panel. Peel N Seal ftw! |
|
Gold Member Username: Mike11202DD9515G VFL 200.1 = : , Sewell, NJ US Post Number: 1107 Registered: Nov-06 | John Wheeler pt. 2 great |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 472 Registered: Oct-07 | What's tht mean? |
|
Gold Member Username: •cam•Post Number: 1206 Registered: Nov-06 | Ignore Mike's comment. John Wheeler was some dick, who refused to learn or even try to act mature. I didn't help that, however. If you want to make your rear doors close with a satisfying *clunk*, then deaden 'em. For the deck, just pull up carpet, slap on a few layers, and put the carpet back. |
|
Gold Member Username: Mike11202DD9515G VFL 200.1 = : , Sewell, NJ US Post Number: 1108 Registered: Nov-06 | everything u use or see isnt omg FTW!.. peel n seal sucks, its cheap asfault shit_ that will probably fall off in high temperatures "Some where 12 wangin on yo moma" fag_ |
|
Gold Member Username: •cam•Post Number: 1207 Registered: Nov-06 | Just ignore it, man. |
|
Gold Member Username: Mike11202DD9515G VFL 200.1 = : , Sewell, NJ US Post Number: 1109 Registered: Nov-06 | ignore it? what do you think is driving away all the knowledgable people on here? these noobs that get annoying as hell and make multiple threads of the same thing.. and make uneducated suggestions to everybody |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 473 Registered: Oct-07 | Uhhh who do u think reccomended peel and seal to me in the first place. People on this forum so idk what ur talking about and I never asked a question relating to this b4. I think you've had your tampon in to long and ur a lil grouchy but after this I will take cames advice and ignore u. Have a merry christmas mike. |
|
Gold Member Username: •cam•Post Number: 1208 Registered: Nov-06 | So, educate. Noobs are an annoying, but necessary part of car audio. That's how we all start. Dwight's not being a no-it-all anymore. Let it be known that Peel-N-Seal doesn't have a great reputation, but don't be a d!ck about it. |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 474 Registered: Oct-07 | My bad cams advice* |
|
Gold Member Username: •cam•Post Number: 1211 Registered: Nov-06 | Don't worry about it. |
|
Gold Member Username: Mike11202DD9515G VFL 200.1 = : , Sewell, NJ US Post Number: 1111 Registered: Nov-06 | " I think you've had your tampon in to long and ur a lil grouchy " Nice comeback how old are you?  Theres a THICK line between noobs and trash |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 475 Registered: Oct-07 | It doesn't? Well what's the cheapest product tht actually works |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 476 Registered: Oct-07 | 19 years young buddy. Whatever argue with urself I'm just trying 2 find out witch deadeners actually work and are pretty cheap |
|
Gold Member Username: •cam•Post Number: 1212 Registered: Nov-06 | eDead's supposed to be good for the $$$$, and they have the forum discounts goin' on. http://www.edesignaudio.com/edv2/advanced_search_result.php?keywords=forum |
|
Gold Member Username: AdddisorderPalm Beach, Florida Post Number: 5518 Registered: Jan-06 | edead=peel and seal sounddeadenershowdown.com little out dated but still good info. peel and seal isnt crap its just budget stuff and it will work but would you be better off with ramaat or second skin then yes. |
|
Gold Member Username: •cam•Post Number: 1213 Registered: Nov-06 | I've heard that before, but v3 sure as hell isn't Peel-N-Seal. |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 477 Registered: Oct-07 | I have no clue which one to get and how much lol. I'm driving right now |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 478 Registered: Oct-07 | Well if I put like 3 layers of peel n seal down will tht compare to the V3? |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 479 Registered: Oct-07 | And another thing its not tht easy deadening the rear deck or I would of did tht I think you have to take out the back seats and tht sh1t is hard! |
|
Gold Member Username: •cam•Post Number: 1215 Registered: Nov-06 | Ahh, well I have no idea what yours looks like. Do what you gotta do. |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 484 Registered: Oct-07 | iight im pretty broke i think ill do like 2 layers of Peel n seal then another layer of the edead or ramaat stuff or something |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 485 Registered: Oct-07 | i think im going to go with this http://cgi.ebay.com/120-FT-eDead-v1-Sound-Deadener-w-Free-Dynamat-Roller_W0QQite mZ190178916058QQihZ009QQcategoryZ67760QQssPageNameZWDVWQQrdZ1QQcmdZViewItem |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 486 Registered: Oct-07 | actuallly it would be 10 dollars cheaper to order from ED |
|
Gold Member Username: JkidderGunshine , State Flawda Post Number: 2822 Registered: Nov-05 | for real peel and seal DOES work. its practically the exact same as edaed or dynamat original. you wont notice any difference. i have it all over my car. doesnt smell, doesnt fall off, easy to apply, cheap as sh!t. I RECOMMEND PEEL N SEAL on a budget!!! |
|
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 13266 Registered: Jul-05 | ^^Ditto...Peel n Seal...is just as good as edeadv1 just throw on about 3-4layers and u will be fine... |
|
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 13267 Registered: Jul-05 | If you want to be even more technical with it..u can go to walmart and get some 3m rubberizing undercoat..its better then any spray on deadner u can get..promise Just put the undercoat on..then the peel n seal on top of that...works like a charm..and cheap |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 491 Registered: Oct-07 | thanks guys i will be using the 3m stuff and peel n seal. i think im going to get a rattle pad from 2nd skin to put under the rear deck |
|
Gold Member Username: FrkkevinResonant Engineering..., Fort Worth... Email Post Number: 4179 Registered: Nov-05 | be sure and use a roller.. key to making it stick is getting all the air out from under it  |
|
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 13268 Registered: Jul-05 | Also u can use a can of Great Stuff expanding foam to insulate the space between the frame and the deck lid. Make sure to lay a plastic bag over your trunk when your doing so because the foam will drip down after expanding. Shave the excess off with a razor. This fills the voids and prevents the deck lid from rattling against the framework. |
|
Gold Member Username: Th3pwn3rPost Number:... Post Number: 6080 Registered: Jul-06 | "I deadened my 2 front doors are you supposed to deaden the back door too???" Ugh. What kind of question is that? You aren't SUPPOSED to do anything but if it's rattling and you don't like it then sound deaden it. You can put sound deadening wherever you want. Just use it wherever you think it's needed. |
|
Silver Member Username: Mj23dynastySome where 12 wangin o..., The Mighty J... USA Post Number: 494 Registered: Oct-07 | i mean their is a proper way to do things and the half azz way of doing things i was jus wondering is doing the back doors the proper? like you wouldnt deaden have the trunk and leave the other half regular you know what im saying?? i was basically asking has any1 deadened the back doors also to improve sound quality? |
|
Gold Member Username: AdddisorderPalm Beach, Florida Post Number: 5532 Registered: Jan-06 | only if they rattle do you really need to do them or if you have speakers in them which you shouldnt really if you ask me. |
|
Gold Member Username: •cam•Post Number: 1218 Registered: Nov-06 | I like the clunk of a well deadened door, personally... |
|
Bronze Member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 24 Registered: Nov-07 | were do you get "real" peal and seal? |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics