COLBY!!! Havoc is yours....

 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 176
Registered: Mar-06
so finally the lucky day but 325 up for grabs if you still want it... butchtra@hotmail.com is the paypal account.....so there ya go buddy
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 781
Registered: Jan-06
Aight sounds good. Let's see some pics? Meter read?
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 191
Registered: Mar-06
So here ya go... never really got it metered... but the reason for it so dirty is i just got it back from the gettin fixed so they were all up inside my car so... and also the blue tape is so the caulk all around the outside didnt get all over the place so....yeah

Upload
Upload
Upload
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 784
Registered: Jan-06
Nah I meant checking the resistance of the coils with a DMM.
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 192
Registered: Mar-06
nah.... i only ran 1000 rms to it so everything should be alright...
 

Silver Member
Username: Philly306

North carolina

Post Number: 545
Registered: Apr-07
lol
 

Gold Member
Username: Basssquared

Kansas

Post Number: 1525
Registered: Nov-06
too lazy to clean sub before taking pics FTMFL :-(
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 193
Registered: Mar-06
FTMFL? may i ask.....
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 785
Registered: Jan-06
Eh, it'd still be nice to get a reading just for reassurance.. (I've bought dual 2 subs that were "good" and they ran 2.8 on the meter)
 

Gold Member
Username: Basssquared

Kansas

Post Number: 1528
Registered: Nov-06
For The Mother Fu<king Lose
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 194
Registered: Mar-06
i got a dmm but how do you check em...
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 786
Registered: Jan-06
Upload
Set your DMM Ohm setting to the closest you can get to 2 ohms without going under (mine was 200 ohms)
Upload
Plug your DMM into your first set of push terminals.
Upload
Take a pic of that reading.

Do the same steps for the set of push terminals and take a pic of that reading as well.
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 787
Registered: Jan-06
It's best to make sure you're in a quiet room, the sub IS OFF, and not to touch the sub. Any movement of the cone (noise, sub being on, hand on the cone, spider, surround etc.) can throw the reading off.
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 195
Registered: Mar-06
yeah i realized that went it was going from .5 ohms to like 2.6 ohms.... but then i put the things in all the way and didnt touch it and it kept bouncing from 1.9-2.1 ohms.... im uploading pics now so...
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 196
Registered: Mar-06
Upload
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 197
Registered: Mar-06
2nd reading
Upload
 

Gold Member
Username: The_image_dynamic

San Diego

Post Number: 3140
Registered: Dec-06
For The Mother Fu<king Lose

Try... For The Motherfücking Loss.

That's the second time I have seen someone get this wrong out of two. Drivingdickless was the first. Stay in school kidlets.
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 198
Registered: Mar-06
bump if ya want it
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 788
Registered: Jan-06
Yeah looks nice, but I have one last question lol.

Look at these two images:

http://i42.photobucket.com/albums/e340/Yukhui/Havoc/havoc020.jpg?t=1196219884

http://i42.photobucket.com/albums/e340/Yukhui/Havoc/havoc019.jpg?t=1196219946


Would you mind telling me if it has the gap plate(pic 1) or not (pic 2)? The plate is between the motor and basket.

(Yes I know, I ask lots of questions...)
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 199
Registered: Mar-06
i would say 55% chance...no...but i am not sure... so gimme a couple hours and ill check when i get home from school....so yeah... and yes you do ask alot of questions.. but hey as long as your willing to take this off my hands... then its fine with me...
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5975
Registered: Jul-06
"That's the second time I have seen someone get this wrong out of two. Drivingdickless was the first. Stay in school kidlets."

I have to agree with you on that but maybe the problem is that they stayed in school and were just passed through the grades without actually learning anything. The last grade that I technically passed would be 8th and I don't have half the trouble some of these graduates do...sad. I think kids are better off staying home and just learning things by themselves. Most of my friends went to expensive schools and they're idiots and just don't know sh1t about sh1t.Back on topic, it doesn't seem like Colby wants it all that much :-)
 

Gold Member
Username: Carguy

Post Number: 6676
Registered: Nov-04
If you want proof of that, then watch Jay Leno's show. He goes to colleges and interviews students asking simple questions. I was surprised to see so many clueless people. I think one of the question was, "Who is the vice president of America" and no one new the answer.
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 200
Registered: Mar-06
no it doesnt have it...
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 202
Registered: Mar-06
bump colby where u at
 

Silver Member
Username: Yukhui

3 15 AA Havocs, Memphis 4kw!!

Post Number: 789
Registered: Jan-06
Hey dude. Do you have an AIM?
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 203
Registered: Mar-06
yea.. bradyvc23 add me
 

Silver Member
Username: Vc23

Sandusky, Michigan U.s.a

Post Number: 206
Registered: Mar-06
colby whats your aim....sn
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us