2008 ELITES RD AUDIO
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 131 Registered: May-07 | They are now complete and ready to be built, We are just waiting for the tooling on the magnet boot to be complete. We had to use three 1" tall magnets to allow maximum Excursion T/s BNIB are FS- 23hz QMS- 3.3 QES- .37 QTS- .33 CMs- 0.16 mm/N mms- 306.3 Grams BL- 19.1 SPL- 85.6 VAS- 57 L 1000-1200 RMS Dual 1.5 ohm Copper shorting ring in the 20mm Top plate 25mm T-yoke Dual spider Paper cone with a Kevlar layer on top NBR surround stitched to the cone    |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12518 Registered: Jul-05 | sweet ! ... |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3148 Registered: Feb-06 | damn that looks nice... is that woven tinsels i see? |
|
Silver Member Username: TejcurrentPost Number: 828 Registered: Apr-07 | Looks nice. |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 132 Registered: May-07 | Yes they are, These subwoofers excell in Sound Quality. They sound amazing in small sealed or small ported boxes. We Will be taking a pre order on them until Christmas. The Pre order prices is 250.00 The reg. price will be around 425-449 We tryed to use dual 1" tall magnets and then dual 1.25 tall magnets but both we bottoming out. To give you a little idea on the Excursion on this subwoofer. We ended up with THREE 1" tall magnets and a 25 mm t-yoke. The Copper shorting ring help eliminate distortion. The FS is 23hz BRIB once they break in you are looking at a 12" with an FS around 15-16hz. |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3162 Registered: Feb-06 | hmm.. when are the new elite spls coming out? i might consider a couple of these though... how low will the 15's Fs be? |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 133 Registered: May-07 | I have the elite SPL v.2 now. A few people already got them, The FS on them will range between 40-60HZ depending on what suspention you want us to use. We can make them handle 6000/7500/10k burps to what you need them to do. They are nasty in SPL to say the least. We will have a guy breaking 160db with a TL here in a stock vehicle with in a week or so with 3 15" |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3175 Registered: Feb-06 | impressive... i was talking about the new elites though |
|
Gold Member Username: MixmastaspigCanada, Canada Canada Post Number: 1244 Registered: Sep-05 | Bump for a nice beefy sub! Can't wait for those V.2's to arrive(DHL said wed or thur) as they have to move them to the correct town for pickup....duhhh! |
|
Gold Member Username: BasssquaredKansas Post Number: 1513 Registered: Nov-06 | in terms of SPL is which one has the ability to get louder this or a 12" L7??? |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 137 Registered: May-07 | For 2008 the Elite will just be 10/12" the reason is these are PURE Sound Quality. We plan on getting them put against all the BIG SQ drivers in a few months. In all my time in owning shops and owning RD i have never heard a better sounding subwoofer in the 1000 watt range. I am building a V shaped wall in my tahoe for 12 of the 12" sealed on one of our new 10,000.1d. I am really excited about how they sound and there ability to hit 20hz notes with percision. |
|
Gold Member Username: Livin_loudDo Work Fi Audio Post Number: 1946 Registered: Jan-06 | ooo....  i like |
|
Silver Member Username: Talon0112 audioque 2.5 145.2 ..., Pa Usa Post Number: 396 Registered: Jun-07 | i gotta hear one of these |
|
Silver Member Username: Talon0112 audioque 2.5 145.2 ..., Pa Usa Post Number: 397 Registered: Jun-07 | do you plan on having these at iasca finals this year |
|
Gold Member Username: MixmastaspigCanada, Canada Canada Post Number: 1245 Registered: Sep-05 | 10,000.1d amp..........woah! Any updates on new amps? Yanks, fo realz? I'm sure this thing would get nasty loud while wooing your girlfriend and NOT calling her back, ouch. Not sure over an L7 but I havn't heard one of these and from what I have heard a single L7 is mostly meh (15" in a huge box) |
|
Silver Member Username: JtownATX, Texas Post Number: 823 Registered: Mar-07 | Hey Steve, how are these comparable to the classics, both being 10"s, I've talked to you on the phone a few times about running two 10"s in a std cab F150...would the elites fit? how would they perform against the classics? besides power handling... |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7152 Registered: Jul-06 | "Yanks, fo realz? I'm sure this thing would get nasty loud while wooing your girlfriend and NOT calling her back, ouch. Not sure over an L7 but I havn't heard one of these and from what I have heard a single L7 is mostly meh (15" in a huge box)" that was yanks fans macho...not yanks fan just for clarification and steve, thanks for adding in another sub for my decision lol |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7153 Registered: Jul-06 | only dual 1.5 ohm? |
|
Gold Member Username: MixmastaspigCanada, Canada Canada Post Number: 1246 Registered: Sep-05 | I didn't even catch that, thanks Yanks Fan! |
|
Silver Member Username: NorthomahaPost Number: 624 Registered: Mar-06 | those are ugly baskets |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7156 Registered: Jul-06 | not gonna lie it is a sexy looking sub....any chance of dual 2 ohm version tho? or even a dual 1 ohm version? |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2941 Registered: Nov-04 | swet mother of marion how come you never told me about he 10kamps steve? tear....=( lol. ill call you or something tomorrow. |
|
Silver Member Username: JtownATX, Texas Post Number: 825 Registered: Mar-07 | ^^^here we go.... |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 138 Registered: May-07 | They have the ability to get very loud But SQ is number one priority on there. For a F150 they could work depending on the depth you have to use they will have a mounting depth of about 9" on the 12" Dual 1.5 is what we went with because it was very tricky to get the design we wanted to work correct with the height of the coil and the weight of the coil and the thermal capabilities of it. Once wired in a box you end up with a .8 to .9 load if you parallel the coils so a 1 ohm mono amp will hold fine. They have the ability to get around a 145 in a trunk car with reccomended power in a correct small ported enclosure with still having great SQ. Besides the number they also sound very loud and smooth to the ear like our Alpha series. We have never tested them in a 55hz box or anything to see about pure spl. We tested them in sealed 1 cube 1.25 cube/ 1.6 cube/ 2.0 cube/ ported @ 20hz/ @ 25hz/ 30hz/ 36hz/ all boxes were about 1.2 to 1.7 after displacement. |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7168 Registered: Jul-06 | i could have just missed it but what sizes are available? 10, 12, 15? just 12? also, that makes sense with the dual 1.5 ohm... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2952 Registered: Nov-04 | 10s and 12s only. |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7169 Registered: Jul-06 | thank you hunter |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2954 Registered: Nov-04 | im teh sh.it lol. |
|
Silver Member Username: JtownATX, Texas Post Number: 836 Registered: Mar-07 | I'm thinking about the new elites now....instead of the classics..... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2955 Registered: Nov-04 | go for it. but id check the mounting depth man. your not gonna have much room, but this would match up perfect with your amp your running right now. i bet it gets pretty loud. but if its not too deep itd be perfect for you. small ported enclosure would be awesome for that truck your getting...(hopefuly) or you can get that ext cab hehe. lol |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2956 Registered: Nov-04 | p.s. yanks responded to your post on huntersmafuckinforum.com aka low-hz.com/forum |
|
Silver Member Username: JtownATX, Texas Post Number: 839 Registered: Mar-07 | Steve mentioned the mounting depth for the 12" but not the 10"..... 9" is wayyyyy too much, unless I get the ext cab, then I might just get another Alpha v1 if there are any left....and then go for the meddlin or the 1750.1 |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2959 Registered: Nov-04 | is it a bench seat or buckets? bench im betting. just get the ext cab lol |
|
Silver Member Username: JtownATX, Texas Post Number: 844 Registered: Mar-07 | if I could pull 6 grand out of my @ss I would go get it right now!!! but unfortunately, I wasn't blessed with such an ability, lol...hopefully it's still there in a couple months... btw, if std cab, 60/40 bench seats... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2961 Registered: Nov-04 | hehe nice. im sure youll make some thing work in there. it would be awesome to see an elite in there. |
|
Silver Member Username: JtownATX, Texas Post Number: 847 Registered: Mar-07 | yeah, but it doesn't seem very probable... |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7171 Registered: Jul-06 | "p.s. yanks responded to your post on huntersmafuckinforum.com aka low-hz.com/forum" LOL. i just reposted bud. i knew there was a connection but never could connect the dots lol |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 139 Registered: May-07 | The classics offer Excelent Sound Quality also,For your setup the classics will for great. |
|
Bronze Member Username: DurskiPost Number: 73 Registered: Nov-06 | Steve: is that $250 for 12" or 15"? what is the 15" price? |
|
Bronze Member Username: DurskiPost Number: 74 Registered: Nov-06 | Sorry, I see there are no 15" avaliable now. I want SQ 15", what ya got for me steve? |
|
Silver Member Username: CblazeRock island, Tenesssee Us Post Number: 541 Registered: Sep-07 | nice |
|
Silver Member Username: JtownATX, Texas Post Number: 854 Registered: Mar-07 | Alpha!!!! |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 142 Registered: May-07 | How much power do you have available for the 15"? |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7182 Registered: Jul-06 | steve, is that $250 shipped on the pre-order sales? and if we order before christmas, we get the price? is there a certain amount that you have available? do you have any numbers with the new elites yet from playing with them? sorry for all the questions, just curious about it....thanks |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 143 Registered: May-07 | Its 250+shipping but we get great rates on shipping.Yes the sales is to Christmas. In a trunk car with a single subwoofer with 1000-1200 you will be in the mid 140's they werent designed for numbers but you can drive them hard. The voil is 55mm tall and will take a good bit before heating up. The other thing is they sound clean and full so they actually will sound louder then they meter. |
|
Gold Member Username: •cam•Post Number: 1112 Registered: Nov-06 | Maybe I need a pair... Ahh. Unfortunately I need money, too. |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7183 Registered: Jul-06 | thanks steve....im seriously considering one.... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2973 Registered: Nov-04 | steve is like disneyland? he makes dreams come true? lol. jk. it would be a good thing to consider yanks seeing as you dont have a ton of room to play round with. =) |
|
Gold Member Username: •cam•Post Number: 1115 Registered: Nov-06 | What tuning and Vb do you recommend? |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 144 Registered: May-07 | If you want to go ported there are many options. For my listening taste i liked the 2.4 cube before displacement tuned to 30HZ. But more people with me liked the 2.6 tuned to 25hz. They still have great output sealed also. I am building my 2003 tahoe out with 12 of them sealed in a V shaped wall to use at our booths. We are also running them sealed in the SQ car we are building. |
|
Gold Member Username: •cam•Post Number: 1116 Registered: Nov-06 | Wow, sounds fun. That's 2.4/6 per sub? Hmm. I think I could pull that. I would probably tune to 30 Hz, maybe 28. Hmm. Considering I want it ridiculously loud (relative my current system), while still sounding good, and I have 4 possible kW, I might go with some Alpha 12s. What's the mounting depth on the 12" Alpha? |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7186 Registered: Jul-06 | yea hunter thats what im thinking |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2980 Registered: Nov-04 | you see that the new mag will be using the xbl2 tech? but cost im not sure on. and 250 for the elite is a da.mn good deal. it looks great, will sound awesome, is a great price, will work in the space you have, and would work with the amp you have...(if i remember correctly) lol |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3189 Registered: Feb-06 | damn i wish you would have produced 15's i would be buying two... |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7189 Registered: Jul-06 | yea i just read about the new mag having the xbl^2 technology....wish i knew when it was coming out tho the elite will work well with my space but im getting a new amp regardless....no more hifonics lol....or profile for the comps lol |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2981 Registered: Nov-04 | i bet he can make you some reece. well maybe... |
|
Gold Member Username: •cam•Post Number: 1123 Registered: Nov-06 | Someone, please. What's the mounting depth on the 12" Alpha? |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 145 Registered: May-07 | 7 3/8" |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7193 Registered: Jul-06 | steve, would we be ordering the subs through you or through one of your retailers? ie, low-hz.... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2984 Registered: Nov-04 | lol rd audio 1000.1? haha this convo sounds familar? lol |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7194 Registered: Jul-06 | does it hunter? lol i dont know what your talking about.....::sarcasm:: lol |
|
Silver Member Username: JtownATX, Texas Post Number: 860 Registered: Mar-07 | hey hey hey!!! if you're looking for a rd1000.1d, I can sell you mine!!! hunter and steve can vouch for me!!!! I need something a lil bigger for my alpha and hopefully soon to be dual or quad 10" classics... |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7195 Registered: Jul-06 | im not sure what im looking for right now theives. still trying to figure out what way i wanna go with my set-up....if i decide to get one, ill let you know bud |
|
Silver Member Username: JtownATX, Texas Post Number: 863 Registered: Mar-07 | alright, keep me posted  |
|
Gold Member Username: •cam•Post Number: 1124 Registered: Nov-06 | Thanks, Steve. |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7196 Registered: Jul-06 | if you dont mind, could you send me a price to y2kmonkey33@aol.com ? no rush, just whenever you get a chance. how much play does it have on it? |
|
Platinum Member Username: Rovin4 10 Pioneer... Post Number: 12524 Registered: Jul-05 | with such low fs it might work well for HT too .... |
|
Silver Member Username: JtownATX, Texas Post Number: 864 Registered: Mar-07 | I've got nothing else to do....email sent! |
|
Gold Member Username: Nyyfan13Fi SSD USA Post Number: 7197 Registered: Jul-06 | thanks bud |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 146 Registered: May-07 | Actual mounting depth on a elite 12" is 205mm or 8 1/5 " |
|
Silver Member Username: Talon0112 audioque 2.5 145.2 ..., Pa Usa Post Number: 418 Registered: Jun-07 | i am seriously thinking about one for a daily set up in the other car |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3201 Registered: Feb-06 | im thinking about how much i was a 15... |
|
Gold Member Username: HdubbTeam Revolution Post Number: 2999 Registered: Nov-04 | huh????? lol. you were a 15? reece? lol |
|
Gold Member Username: Denali_on_22sYou can call me Scroog... Post Number: 3202 Registered: Feb-06 | want haha... |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 147 Registered: May-07 | The Xmax will be roughly 20mm |
|
Gold Member Username: HdubbTeam Revolution Post Number: 3011 Registered: Nov-04 | any news on the omega yet steve? i still want one. lol. just the wow factor. and scott i bet this would be a good sub for you. =) what kinda of car is it goin in? with the resonating frequency that low, in a box tuned to28- 30 i bet this woofer will have great sound quality. and im sure with a 1000 watts it will very loud for a sq sub. =) |
|
Silver Member Username: Talon0112 audioque 2.5 145.2 ..., Pa Usa Post Number: 431 Registered: Jun-07 | pt cruiser convertible |
|
Silver Member Username: TeamrevolutionATLANTA, GA USA Post Number: 149 Registered: May-07 | Yes we are working on the omega, Truthfully the elite surpassed what we thought on performance so we are changing a few things on the omega to ensure there not to close together. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics