|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 3 Registered: Nov-07 | anybody have a spl box design for 2 kicker L5 10s thanks |
|
Gold Member Username: InsearchofbassPost Number: 7190 Registered: Jun-04 | I assume this is an extended cab? Also do you want a musical box or flat out one note wonder? |
|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 4 Registered: Nov-07 | they are in a suzuki aerio sx (SMALL) hatchback. I could get maybe 3.0 cu. ft of airspace max,and no I don't want a one note system if I can get loud without it thanks |
|
Gold Member Username: InsearchofbassPost Number: 7192 Registered: Jun-04 | sorry for some reason I thought the thread said S10 in it LOL....go 1.4 cubes net each ported to 35 hz stuff it with 1 pound of polyfill each chamber and the subs will see a boosted airspace of 2.00 cubic feet....run the port tune on a calculator at 2.00 cubic feet is the next step http://www.linearteam.dk/default.aspx?pageid=ventcalculator http://www.carstereo.com/help2/Articles.cfm?id=31 |
|
Gold Member Username: InsearchofbassPost Number: 7193 Registered: Jun-04 | 1.4 cubic feet net means after the sub and port so your best bet is pvc style ports |
|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 5 Registered: Nov-07 | thanks. I had been told you could not use polyfill in a ported box because it would blow out the port tube |
|
Silver Member Username: Killer44Ontario Canada Post Number: 970 Registered: Dec-04 | all you do is put a peice of mesh on the port end that is inside the box, ive done it before and it worked fine, i used a peice of screen from a screen door and put it on using an elastic or some some tape... |
|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 6 Registered: Nov-07 | I have a slot ported box for two round 10s that is 2.2 cu.ft. I have not cut it for square subs because I thought it was too small,but if I can stuff it I might give it a shot. what do you think? thanks and happy thanksgiving |
|
Gold Member Username: InsearchofbassPost Number: 7194 Registered: Jun-04 | as far as the polyfill I should say get the kind in sheet form and then staple or glue it to the box walls...that other box is too small |
|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 7 Registered: Nov-07 | thanks |
|
Gold Member Username: InsearchofbassPost Number: 7195 Registered: Jun-04 | yw |
|
Gold Member Username: InsearchofbassPost Number: 7198 Registered: Jun-04 | heres a link to the correct amount of fill looks like 1.40 pounds per cubic foot http://www.diysubwoofers.org/talkshop/messages/41415.htm PORTED ENCLOSURE 1.4-ft³ Box Stuffing Density (lb/ft³ ) System Resonance (Fsb) Effective Size Percentage Gain 0 42.0 1.4 -- 0.40 39.1 1.6 14% 0.85 37.2 1.8 29% 1.25 35.2 1.9 36% 1.40 34.2 2.0 43% 1.75 35.2 1.9 36% |
|
Bronze Member Username: CsuhoNashville, Tn Post Number: 58 Registered: Jun-07 | imo i wouldn't stuff the box. 1-1.25 is fine for a 10 ported. i would shoot for like 1.25 after everything per sub and use a couple 4" aero ports or just 1 6" aero port. if you could give me a few dimensions i could figure something out. |
|
New member Username: Fred_sanfordHuntsville, Alabama Usa Post Number: 8 Registered: Nov-07 | the box i have works out to 1.13cu. ft net after speaker displacement tuned to 36hertz. being that i have it i am going to give it a try, if it sounds like $h/t i'll build a box about 1.5 per sub thanks everybody |