Good sub that can handle 2500-3000 watts

 

Silver Member
Username: Mark872

2 Type X 12s, Hughes S..., Texas

Post Number: 145
Registered: Jul-07
I was almost sure i was gonna get a btl...but ive been readin and hearing alot of bad things about Fi lately, so now im not so sure. what some other good subs i need too look at that can handle around 2500 too 3000 watts daily?
 

Silver Member
Username: Talon01

12 audioque 2.5 144.9 ..., Pa Usa

Post Number: 321
Registered: Jun-07
kove armageddon
dd 9500
massive
dc audio lv 4
 

Gold Member
Username: Jakeyplaysbass

ASU

Post Number: 2066
Registered: Jul-05
DD 9500 would love that power.
 

Gold Member
Username: Mike11202

DD9515G VFL 200.1 = : , Sewell, NJ US

Post Number: 1077
Registered: Nov-06
DD 9500 x2
 

Gold Member
Username: Extrmndor3

Post Number: 7133
Registered: Feb-06
atomic apx...
 

Silver Member
Username: Mark872

2 Type X 12s, Hughes S..., Texas

Post Number: 146
Registered: Jul-07
how much woul new 9500 cost
 

Silver Member
Username: Talon01

12 audioque 2.5 144.9 ..., Pa Usa

Post Number: 325
Registered: Jun-07
i think 600ish
 

Silver Member
Username: Mark872

2 Type X 12s, Hughes S..., Texas

Post Number: 147
Registered: Jul-07
ouch...now i remember why i was lookin at the btl's. Oh well..ill just have to save a lil more
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2582
Registered: Nov-05
apx's x2

what size woofer are you looking for??
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5741
Registered: Jul-06
"ouch...now i remember why i was lookin at the btl's. Oh well..ill just have to save a lil more"

Wise choice man.You can also get an Atomic APX like these guys said,those are awesome subs.They're really not that great for daily,they're better SPL subs than anything.
 

Gold Member
Username: Insearchofbass

Post Number: 7131
Registered: Jun-04
Rd audio Elite SPL V.2 Series....

2500 Watts RMS 12/1518" 2000 watts RMS for the 10"
7500 Watt burst rated for 12/15/18" 6800 watts for 10"
Cast basket
High power dual 1" thick 120oz magnet slugs
Extended neck joints on coil, cone, and spider
3 inch extreme temperature Flat wound aluminum voice coil
Long excursion motor structure
Low carbon thick front and deep rounded back plate
Vented gap
Resin impregnated poly cotton spider
High efficiency of over 93.5 DB at 1 watt
New paper cone with even more Kevlar fiber
Available in 10/12/15/18" The 18" is custom order, 15" model pictured
Stocked in dual 1 ohm coils but will custom build dual 2 ohm
Box suggestions/port and driver included

ELSPL12
3.5ft3 4(4" ports x 10 ½" long) (55Hz) 1000w
4.0ft3 4(4" ports x 8 ¼" long) (55Hz) 1000w

ELSPL15
4.25ft3 70si x 10 ¼" long (55Hz) 2000w
7.5ft3 150si x 10" long (55Hz) 2000w

All SPL sizes
Call or email for custom box sizes for SPL or street bass
 

Silver Member
Username: Teamrevolution

ATLANTA, GA USA

Post Number: 122
Registered: May-07
box specs are old off V.1, we can also make a 2500 w RMS alpha with a flat wind coil, Or The NEW heavyweight V.2 SQL that the first guys are getting this week. The heavy handles 3-4k RMS like a Champ.
 

Silver Member
Username: Mj23dynasty

Harrisburg star city, Pistolvania USA

Post Number: 158
Registered: Oct-07
xxx
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2588
Registered: Nov-05
what size woofer and what amp??
 

Gold Member
Username: Nd4spd18

Northwest PA

Post Number: 3940
Registered: Jul-06
Dwight don't post if you don't know WTF your talkin about. An XXX will not take 3000 watts.



DD 9500 on 3kw would absolutely own in SPL as far as single sub systems go. (I know that cause I personally run one). It would also have decent SQ for daily.
 

Silver Member
Username: Shade

Moxee, Wa U.S.

Post Number: 466
Registered: Nov-06
i can sell u a dd9500 been reconed hit me up
 

Gold Member
Username: Extrmndor3

Http://crazydbs.freefo..., ^^^NEW FORUM

Post Number: 7138
Registered: Feb-06
apx
 

Gold Member
Username: Cenus

Ohio

Post Number: 3865
Registered: Jan-05
http://youtube.com/watch?v=dSkpHyg_g1o

"Dwight don't post if you don't know WTF your talkin about. An XXX will not take 3000 watts"

haha MS i think your a dumbazz.
 

Silver Member
Username: Mark872

2 Type X 12s, Hughes S..., Texas

Post Number: 150
Registered: Jul-07
well im actually thinkin about puttin two 15s in the back seat of my car...and the amps im lookin are the kicker zx2500 and the hifonics colossus xx
 

Silver Member
Username: Mj23dynasty

Harrisburg star city, Pistolvania USA

Post Number: 163
Registered: Oct-07
M.S owned by a nooob lol jus kidding.
 

Platinum Member
Username: Rovin

4 10 Pioneer...

Post Number: 12473
Registered: Jul-05
i agree with APX or 9500DD even a treo ssx .....
 

Gold Member
Username: Nd4spd18

Northwest PA

Post Number: 3971
Registered: Jul-06
10kw....... yeah right. I'll believe that when I see the output of their amp measured in real time and the source of power for the amp........ to get 10kw you'd damn near have to have a nuclear power plant in your car
 

Gold Member
Username: Cenus

Ohio

Post Number: 3872
Registered: Jan-05
"An XXX will not take 3000 watts"

that statement alone makes you look like a dumbass MS, need i say more.

also mark have you thought about just getting one badazz sub to take all the power? the IA death penatly 21inch comes to mind.
 

Gold Member
Username: Johnfiac

A-ToWn, 9515 thumpin... What u bumpin?

Post Number: 3817
Registered: Mar-06
^im pretty sure it would take 3K... dunno from expierience but if it wont thats pretty fu<ked up just by the looks of an XXX....
 

Gold Member
Username: Livin_loud

Do Work Fi Audio

Post Number: 1925
Registered: Jan-06
they had all US amps hooked up to the XXX in that vid. only reason they could push that much to it is because they KNOW they're sh!t. its also in a friggin house, not a car or ran daily.
 

Silver Member
Username: Yamahabanshee1

Paulding, Ohio USA

Post Number: 420
Registered: Jul-04
15" Memphis Mojo
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5760
Registered: Jul-06
A XXX WILL take 3K.I saw a guy at a DB Drag comp who was running 3 15'' XXXs and he was running more to his subs than 3K a piece.
 

New member
Username: Massiveaudio

Post Number: 6
Registered: Oct-07
Our DMX Stage 2 will do 3000-6000max for SPL Freq burping. For music applications you need a new box and wrms is 1500-3000max. For the price you cannot beat that.

Deos anyone know of a woofer that does 2000 watts or more for music applications?
 

Gold Member
Username: Southernrebel

Monroe, Louisiana 2 DD3515s, 2...

Post Number: 5497
Registered: Mar-04
Hell, DD3515's can take 2kwrms daily.

You just have to keep it clean
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5789
Registered: Jul-06
"Hell, DD3515's can take 2kwrms daily.

You just have to keep it clean"

I can vouch for that :-)
 

Silver Member
Username: Tejcurrent

Post Number: 797
Registered: Apr-07
I'll vouch for the BTL, I haven't had a problem with mine, and I got my first one over a year ago. They take 4krms without a hitch if you know how to set your filters properly (don't play them below tuning with a SSF). Most people start having problems with BTL when they give them double the rms without careful tuning and the proper enclosure. I surely wouldn't rule it out.

DD has proven itself in the lanes, but for a low tuned ground pounder I'm very pleased with the BTLs (and the fact it's priced hundreds lower than most comparable drivers doesnt hurt either.)
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5790
Registered: Jul-06
There's been a few big competitors that weren't happy with their BTLs :-( I remember one guy at DB Drag World Finals...what a time for your subs to blow up.
 

New member
Username: Massiveaudio

Post Number: 7
Registered: Oct-07
Thanks..
 

Silver Member
Username: Tejcurrent

Post Number: 800
Registered: Apr-07
I've talked to people running several brands that blew at finals (Kicker etc). Blowing a sub at finals is pretty common compared to other shows because of how hard you're pushing the equipment.
 

Silver Member
Username: Tejcurrent

Post Number: 801
Registered: Apr-07
My bro's running 2k to his bl, I've run 4k to my btls daily for long long periods of time with no problems at all. I think with a good setup, proper voltage, and careful tuning no one should have any problems with 3krms.
 

Silver Member
Username: Jnoel

AIM= j69noel, KY

Post Number: 413
Registered: May-07
man buy my dd9918c witha red kevlar cone and a fresh reone for 580 shipped anywhere in the us
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5827
Registered: Jul-06
"I've talked to people running several brands that blew at finals (Kicker etc). Blowing a sub at finals is pretty common compared to other shows because of how hard you're pushing the equipment."

It blew up for a BS reason from what was said about those BTLS...but that's what happens when you run crazy power to subs that have ratings.
 

Gold Member
Username: Safe_cracker

Chicago, IL US

Post Number: 3776
Registered: Jan-06
Now wHich XXX, the SS XXX or the RE XXX? Honestly the SS XXX can handle a lot more power than the RE XXX but my TC sounds 5200 handled enough current that blew my DD Z1a with out a single hitch! My first 5200 blew because it was a CES show driver and was rigged to show mad excursion under little power and when I gave it some GOOD juice it ovexcureded (sp) and ripped all the tinsels out, lOl. Now I have tried to blow this up and even popped my DD Z1a on music@ 1.2 ohms running 18V but the sub was unharmed, I am in love, lOl. Polo.. :-O
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2841
Registered: Nov-04
ooooh i cant wait for my rd hw v.2 to get here. they are a 4k rms sub. should be here with in this week lik steve said. i will give her 8k and well see if she holds up. i am extremely confident she will. i was givin a alpha v.2 3k.
the lms ultra is a 4-5k rms woofer.
4hp based moofas
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2652
Registered: Nov-05
hunter, wat u got to put out 8k? and wat did u even do w/ that bad boy i sent u?
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2842
Registered: Nov-04
my 2 3250.1s will put out 8k. =) and that 35.1? or btl? btl is kinda hangin out till i figure out if i wanna recone it or just sell the motor. the 35.1 is for my wifes oem10. =)
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2658
Registered: Nov-05
is that all installed yet? any pics? should be very nice. i was talkin more about the btl lol didn't hear u sold it so was wondering... good stuff tho
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2845
Registered: Nov-04
still not. nbeen slacking lol. no time. =( but i am very soon! by the end of this week... im aiming for.... but i wanna keep the btl but need to get a reconel =\ dont wanna sell her. but trades i was open for lol.
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2665
Registered: Nov-05
haha hell yea. i need to get rid of my death penalty, 2 boxes, blade amp and crankenstein amp. need to buy subs and bats for my secret project lol
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2846
Registered: Nov-04
lol yeah i need bats, wiring, deadener, mdf, expanding foam, more wire, and most importantly a new back glass. had a ree ree moment and the hatch slammed down(no hydros holding it up...vise grips lol ftw) on my box and broke the glass. =( sad day.
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2666
Registered: Nov-05
oh noooooo. thats terrible. mdf isnt too expensive. expanding foam isnt either. rest IS NOT CHEAP. all i need is, 2 subs, mdf for box, another run of 0g to back, 2 or 3 batts and a partridge in a pear tree
 

Silver Member
Username: Jnoel

AIM= j69noel, KY

Post Number: 428
Registered: May-07
man buy my dd9918c witha red kevlar cone and a fresh reone for 540 shipped anywhere in the us
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2848
Registered: Nov-04
na mdf isnt to bad. goin to make it my roof lol. 1/2 strips between my roof braces then one long sheet up to my a pillar wih expanding foam fillin in the gaps, then deadener over that folowed by bed liner or paint havent decided yet. a few runs of 0 afew runs between bats and for some stupid reason ive decided im goin to run 4ga as speaker wire. lol. more wow factor then anything really. =\ its ovekill i know....
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2671
Registered: Nov-05
4g speaker hahahaha my homey running 12,000 watts only uses 8g
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 5868
Registered: Jul-06
"na mdf isnt to bad. goin to make it my roof lol. 1/2 strips between my roof braces then one long sheet up to my a pillar wih expanding foam fillin in the gaps, then deadener over that folowed by bed liner or paint havent decided yet. a few runs of 0 afew runs between bats and for some stupid reason ive decided im goin to run 4ga as speaker wire. lol. more wow factor then anything really. =\ its ovekill i know...."

Doing all of that will put you in a modified class.I'm sure you know that but it's not easy in modified.What class do you plan on competing in?
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2853
Registered: Nov-04
yeah thats what i was worried about and is a reason its been stalled. im not sure what class and i cant find a detailed usac rulebook..
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2854
Registered: Nov-04
might just go with tons of deadener
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2674
Registered: Nov-05
prolly ur best bet if u want to win.... what kind of deadener u lookin at
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2855
Registered: Nov-04
second skin and dynamat. maybe 200sq fee of edead.
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2675
Registered: Nov-05
not too cheap. y not do peal and seel. 15 bucks per roll
 

Silver Member
Username: Mark872

2 Type X 12s, Hughes S..., Texas

Post Number: 151
Registered: Jul-07
so do yall agree that i should go with some of the others mentioned over the btl??
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2679
Registered: Nov-05
apx or dd 9500 > btl
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2856
Registered: Nov-04
its not sold here. but i will look again today. haha 200 bux worth lol
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2682
Registered: Nov-05
its sold in all lowes and home depot's

go to roofing section by the lumber and its prolly about 15 20 ft down. grey with baby blue lettering. or i could ship u some if its not really there. or just ask someone at lowes :-)
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2857
Registered: Nov-04
haha they had some picked up two rolls for 30 bux not bad...and a glo stick....i dont know why....just wanted one lol
 

Gold Member
Username: Jkidder

Gunshine , State Flawda

Post Number: 2683
Registered: Nov-05
haha by the checkout? 24 hr glow sticks. not that i go to lowes alot or anything!!! haha
 

Gold Member
Username: Hdubb

Team Revolution

Post Number: 2869
Registered: Nov-04
haha yes sir. my son loves the damn thing. ill give them too him till he gets teeth. =(
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us